Table of Contents
Advertisement
Product Specification
3.1 Introduction
The SM2-D1312(IE)-TI6455 CMOS camera series are built around the A1312(IE/C) CMOS image
sensor from Photonfocus and IMAGO Technologies, that provides a resolution of 1312 x 1082
pixels at a wide range of spectral sensitivity. There are standard monochrome and NIR
enhanced monochrome (IE) models. The camera series is aimed at standard applications in
industrial image processing. The principal advantages are:
•
Resolution of 1312 x 1082 pixels.
•
Wide spectral sensitivity from 320 nm to 1030 nm for monochrome models.
•
Enhanced near infrared (NIR) sensitivity with the A1312IE CMOS image sensor.
•
High quantum efficiency: > 50% for monochrome models and between 25% and 45% for
colour models.
•
High pixel fill factor (> 60%).
•
Superior signal-to-noise ratio (SNR).
•
Low power consumption at high speeds.
•
Very high resistance to blooming.
•
High dynamic range of up to 120 dB.
•
Ideal for high speed applications: Global shutter.
•
Image resolution of up to 12 bit.
•
On camera shading correction.
•
3x3 Convolver for image pre-processing included on camera.
•
Up to 512 regions of interest (MROI).
•
2 look-up tables (12-to-8 bit) on user-defined image regions (Region-LUT).
•
Crosshairs overlay on the image (monochrome models only).
•
Image information and camera settings inside the image (status line).
•
Software provided for setting and storage of camera parameters.
•
The camera has a Gigabit Ethernet interface.
•
Texas Instrument TMS320C6455 DSP with 1.2GHz and 9600MIPS
•
512MB onboard DDR RAM.
•
The camera has a Gigabit Ethernet interface.
•
2GB microSD card (max. 32GB).
•
Advanced I/O capabilities: 3 isolated trigger inputs, 3 differential isolated RS-422 inputs, 3
differential isolated RS-422 outputs and 3 isolated outputs.
•
Wide power input range from 12 V (-10 %) to 24V (+10 %).
The general specification and features of the camera are listed in the following sections.
3
17
Advertisement
Table of Contents
