Table of Contents
Advertisement
2 How to get started (SM2)
2.4 Software Installation
This section describes the installation of the required software to accomplish the tasks
described in this chapter.
1.
Use the JavaApplet (tcpdisplay.jar) to connect to the camera. There are differnet ways to
get the JavaApplet.
•
If you have already the JavaApplet and you know the camer IP address, doubleclick
the JavaApplet and enter camera IP address.
•
You can find the JavaApplet in the Photonfocus\SM2 folder, when you have installed
PFInstaller and selected the SM2 package during installation.
•
If you don't know the camera IP address, use the VIBFinder.exe tool (you can find it
also in the Photonfocus\SM2 folder of the PFInstaller installation). Click to "Find
Devices", select the camera and click to "Show Properties". Now you can click to
"Open TCP Display".
•
The JavaApplet (tcpdisplay.jar) is also on the microSD card of the camera. Unplug the
microSD card and connect it to a computer or download the JavaApplet directly over
FTP (ftp://192.168.1.240, username, password)
2.
The web browser displays the web server main window as shown in Fig. 2.7.
Figure 2.7: Framework (web server) start page
.
14
Advertisement
Table of Contents
