Functionality; Image Acquisition; Readout Modes - Photon Focus SM2-D1312-TI6455 User Manual

Functionality

This chapter serves as an overview of the camera configuration modes and explains camera
features. The goal is to describe what can be done with the camera. The setup of the
SM2-D1312(IE)-TI6455 series cameras is explained in later chapters.

4.1 Image Acquisition

4.1.1 Readout Modes

The SM2-D1312(IE)-TI6455 cameras provide two different readout modes:
Sequential readout Frame time is the sum of exposure time and readout time. Exposure time
of the next image can only start if the readout time of the current image is finished.
Simultaneous readout (interleave) The frame time is determined by the maximum of the
exposure time or of the readout time, which ever of both is the longer one. Exposure
time of the next image can start during the readout time of the current image.
Table 4.1: Readout mode of SM2-D1312(IE)-TI6455Series camera
The following figure illustrates the effect on the frame rate when using either the sequential
readout mode or the simultaneous readout mode (interleave exposure).
F r a m e r a t e
( f p s )
Figure 4.1: Frame rate in sequential readout mode and simultaneous readout mode
Sequential readout mode For the calculation of the frame rate only a single formula applies:
frames per second equal to the inverse of the sum of exposure time and readout time.
Readout Mode
Sequential readout
Simultaneous readout
f p s = 1 / r e a d o u t t i m e
S i m u l t a n e o u s
r e a d o u t m o d e
S e q u e n t i a l
r e a d o u t m o d e
e x p o s u r e t i m e < r e a d o u t t i m e
e x p o s u r e t i m e = r e a d o u t t i m e
SM2-D1312(IE)-TI6455 Series
available
available
f p s = 1 / e x p o s u r e t i m e
f p s = 1 / ( r e a d o u t t i m e + e x p o s u r e t i m e )
e x p o s u r e t i m e > r e a d o u t t i m e
E x p o s u r e t i m e
4
25