Table of Contents
Advertisement
Product Specification
3.1 Introduction
The MV1-D2080(IE)-G2 GigE CMOS camera series is built around the monochrome A2080(IE)
CMOS image sensor from Photonfocus, that provides a resolution of 2080 x 2080 pixels at a
wide range of spectral sensitivity. It is aimed at demanding applications in industrial image
processing and metrology that require a high Signal to Noise Ratio (SNR). The principal
advantages are:
•
Resolution of 2080 x 2080 pixels.
•
Spectral range: standard 370 nm - 1000 nm, IE models: 370 - 1020 nm.
•
High quantum efficiency (> 50%).
•
High pixel fill factor (> 60%).
•
Superior signal-to-noise ratio (SNR) and high full well capacity of 90 ke .
•
Global shutter.
•
Very high resistance to blooming.
•
High dynamic range of up to 120 dB with patented LinLog
•
Gigabit Ethernet interface, GigE Vision and GenICam compliant.
•
Maximal frame rate at full resolution of 2080 x 2080 pixels: 25 fps.
•
Greyscale resolution of up to 12 bit.
•
On camera shading correction.
•
3x3 Convolver for image pre-processing included on camera.
•
Up to 512 regions of interest (MROI).
•
2 look-up tables (12-to-8 bit) on user-defined image region (Region-LUT).
•
Crosshairs overlay on the image.
•
Image information and camera settings inside the image (status line).
•
Software provided for setting and storage of camera parameters.
•
The compact size of 60 x 60 x 51 mm
perfect solution for applications in which space is at a premium.
•
Advanced I/O capabilities: 2 isolated trigger inputs, 2 differential isolated RS-422 inputs
and 2 isolated outputs.
•
Programmable Logic Controller (PLC) for powerful operations on input and output signals.
•
Wide power input range from 12 V (-10 %) to 24 V (+10 %).
The general specification and features of the camera are listed in the following sections.
The MV1-D2080IE-G2 camera with the A2080IE sensor will be available on re-
quest.
.
3
makes the MV1-D2080(IE)-G2 CMOS cameras the
®
technology.
3
23
Advertisement
Table of Contents
