Product Specification; Introduction - Photon Focus MV1-R1280-50-G2 Camera Series User Manual

Ultra low light cmos camera with gige interface
Table of Contents

Advertisement

Product Specification

4.1 Introduction

The Photonfocus MV1-R1280 GigE camera is built around an ultra-low noise CMOS image
sensor with a high dynamic range. The camera is targeted at demanding ultra-low light
scientific applications and high-end night vision systems.
The principal advantages are:
Resolution of 1280x1024 pixels
Optimized for ultra-low light conditions
Very low noise of less than 1 e
Output greyscale resolution of up to 16 bit; internal resolution of 18 bit.
Spectral range: 350 - 930 nm
Rolling Shutter
Gigabit Ethernet interface, GigE Vision and GenICam compliant
Frame rate: 33 fps at full resolution
Advanced I/O capabilities: 2 isolated trigger inputs, 2 differential isolated RS-422 inputs
and 2 isolated outputs.
Crosshairs overlay on the image
Image information and camera settings inside the image (status line)
Software provided for setting and storage of camera parameters
The rugged housing at a compact size of 55 x 55 x 57 mm
MV1-R1280 GigE camera series the perfect solution for applications in which space is at a
premium.
Programmable Logic Controller (PLC) for powerful operations on input and output signals.
A/B RS-422 shaft encoder interface
Wide power input range from 12 V (-10 %) to 24V (+10 %).
The general specification and features of the camera are listed in the following sections.
3
makes the Photonfocus
4
25

Advertisement

Table of Contents
loading

Table of Contents