1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. XV-DW100U
  6. Service manual

Sharp XV-DW100U Service Manual

Lcd projector
Hide thumbs
Table of Contents

Advertisement

Quick Links

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
• SPECIFICATIONS.............................................. 2
• NOTE TO SERVICE PERSONNEL .................... 4
• OPERATION MANUAL ...................................... 7
• REMOVING OF MAJOR PARTS ...................... 12
• THE OPTICAL UNIT OUTLINE........................ 18
FOCUS ADJUSTMENT .................................. 19
• ELECTRICAL ADJUSTMENT .......................... 25
• ADJUSTING THE PC INTERFACE .................. 33
• TROUBLE SHOOTING TABLE ........................ 34
• CHASSIS LAYOUT ........................................... 50
SHARP CORPORATION
SERVICE MANUAL
LCD PROJECTOR
XV-DW100U
MODEL
CONTENTS
Page
• BLOCK DIAGRAM ........................................... 52
• OVERALL WIRING DIAGRAM ......................... 54
• WAVEFORMS .................................................. 57
• SCHEMATIC DIAGRAM ................................... 58
Ë ELECTRICAL PARTS ............................... 117
Ë ACCESSORIES PARTS ........................... 150
Ë PACKING PARTS ..................................... 150
• PACKING OF THE SET ................................. 151
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
1
XV-DW100U
SY9U3XVDW100U
Page

Advertisement

Table of Contents
loading

Related Manuals for Sharp XV-DW100U

Summary of Contents for Sharp XV-DW100U

  • Page 1: Table Of Contents

    XV-DW100U SERVICE MANUAL SY9U3XVDW100U LCD PROJECTOR XV-DW100U MODEL In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used. CONTENTS...

  • Page 2: Specifications

    XV-DW100U Specifications...

  • Page 3: Important Service Safety Notes

    XV-DW100U IMPORTANT SERVICE SAFETY NOTES Ë Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and servicing guidelines as follows: » Use an AC voltmeter with sensitivity of 5000 ohm per WARNING volt., or higher, sensitivity to measure the AC voltage...

  • Page 4: Note To Service Personnel

    XV-DW100U NOTE TO SERVICE NOTE POUR LE PERSONNEL PERSONNEL D’ENTRETIEN 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5...

  • Page 5: Lamp Replacement

    éviter une exposition des yeux et la peau (Fig. 1). Note: Please obtain a lens cap before servicing a Remarque: Priére de se procurer un capuchon model XV-DW100U that is received without d'optique acant d'entretien un modéle one. XV-DW100U qui est livré sans.
  • Page 6 XV-DW100U WARNING: High brightness light source, do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly in to the beam of light. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO MOISTURE OR WET LOCATIONS.

  • Page 7: Location Of Controls

    XV-DW100U Location of Controls Numbers next to the part names refer to the main pages in this manual where the topic is explained. Projector LAMP REPLACEMENT MUTE button indicator TEMPERATURE WARNING POWER indicator indicator POWER buttons (ON/OFF) VOLUME buttons ( / )

  • Page 8: Operating The Wireless Mouse Remote Control

    XV-DW100U Operating the Wireless Mouse Remote Control Remote Control Front View Top View Remote control MUTE button signal transmitter POWER buttons VOLUME buttons (ON/OFF) LENS button MENU button Rear View ADJUSTMENT ENTER button buttons ( INPUT 1 button FREEZE button...
  • Page 9 XV-DW100U Remote Control Positioning • The remote control can be used to control the projector within the ranges shown below. • The signal from the remote control can be reflected off the screen for easy operation. However, the effective distance of the signal may differ due to the screen material.

  • Page 10: Connection Pin Assignments

    XV-DW100U Connection Pin Assignments Analog Computer 1 and 2 Signal Input Ports: 15-pin mini D-sub female connector Computer Input Analog 1. Video input (red) 9. Not connected 2. Video input 10. GND (green/sync on green) 11. GND 3. Video input (blue) 12.
  • Page 11 XV-DW100U Dimensions Rear View Top View Side View (261) (29) Front View (199) Bottom View Units: inches (mm)

  • Page 12: Removing Of Major Parts

    XV-DW100U REMOVING OF MAJOR PARTS 1. Removing the Intake cover, lamp unit and lens cover. 1-1. Detach the Intake cover. 1-2. Remove the four lock screws off the inner filter frame. Detach the frame. 1-3. Remove the lock screw off the lamp cover. Slide and detach the lamp cover.

  • Page 13: Removing The Top Cabinet

    XV-DW100U 3. Removing the top cabinet. 3-1. Remove the four lock screws off the top cabinet. 3-2. Unhook the top cabinet by pressing the center of both sides of the bottom cabinet as well as the hook on the front (all marked with `). Slowly lift the back of the cabinet and disconnect the operation key unit connector (KY) and the speaker connector (SP).

  • Page 14: Removing The Pwb Units

    XV-DW100U 4. Removing the PWB units 4-1. Remove the five lock screws off the PC I/F unit. Lift and detach the unit off the output unit. 4-2. Disconnect the connectors from the output unit. 4-3. Remove the four lock screws off the output units. Remove also the lock screw off the ground fixture and detach the ground fixture.

  • Page 15: Removing The Optical Mechanism Unit

    XV-DW100U 5. Removing the optical mechanism unit 5-1. Remove the two lock screws off the lamp socket holder. Detach the holder. 5-2. Disconnect the ground wire from the power unit. 5-3. Remove the six lock screws off the optical mechanism unit. Lift and detach the unit.
  • Page 16 XV-DW100U 6. Removing the ballast / filter / sound-out unit assembly. 6-1. Disconnect the connector (BA) from the AC power switch. 6-2. Disconnect the ground wire from the inlet unit. 6-3. Remove the two lock screws off the ballast/filter/sound-out unit assembly. Detach the assembly.

  • Page 17: Resetting The Total Lamp Timer

    · Clogged air filter. · Clean the filter. · Cooling fan breakdown. · Take the projector to your nearest Au- · Internal circuit failure. thorized Sharp Industrial LCD Products Dealer or Service Center for repair. LAMP REPLACE- The lamp does · Burnt-out lamp.

  • Page 18: The Optical Unit Outline

    XV-DW100U THE OPTICAL UNIT OUTLINE Layout of the optical system Note: Layout for positioning the optical system. Projection Lens Incident polarizing plate B Incident polarizing plate R Dichroic coating Dichroic coating (B transmission) (R transmission) B-LCD R-LCD Marking Cross dichroic prism...

  • Page 19: Convergence And Focus Adjustment

    XV-DW100U CONVERGENCE AND FOCUS ADJUSTMENT » Start the convergence and focus adjustments with the top cabinet and the LCD cover removed but the power on. Use the remote control to adjust the image. Take the follow- ing procedures. 1. Focusing the projection lens (A) Replacing all the 3 LCD panels 1.

  • Page 20: Convergence And Focus Adjustments Mechanism

    XV-DW100U Notes : 1 The eccentric cam is used for convergence adjustment. This means that the cam’s turning and the linear movement are not always uniform. 2 This model is not equipped with the LCD image adjustment mechanism. This is because the dichroic prism is used for image formation.
  • Page 21 XV-DW100U Convergence and Focus Adjustments at a Glance Adjustment directions Adjustment Direction Definition Direction of LCD panel X direction LCD right and left Convergence Y direction LCD top and bottom θZ direction Rotation around Z axis LCD turning axis Z direction LCD optical axis θX direction...
  • Page 22 XV-DW100U Replacing the LCDs With the top cabinet removed (1) Disconnect the LCD flat cable from the output PWB connector. (2) Remove the lock screws "b" and "c". Detach the R/B adjusting plate or the G adjusting plate together with the LCD panel.
  • Page 23 XV-DW100U Adjusting the optical axis of the mirrors (M1, M5 and M6) The optical axis must be readjusted if an eclipse happens with the R. G or B mirrors. Generally speaking, this adjustment is needed when any of the internal optical components has been replaced.
  • Page 24 XV-DW100U Adjusting the lamp duct. turn Lock screws Lamp duct Cooling-Fan (Exhaust) Adjustment procedure reguired when the lamp has been replaced and you can see ununifomity. (Case of Right and Left have ununifomity on the screen) (1) Let the lamp light up.

  • Page 25: Electrical Adjustment

    XV-DW100U ELECTRICAL ADJUSTMENT Hook up a signal generator, or a DOSV or Mac personal computer to the projector in order to feed the signals specified in the Adjusting conditions. Adjusting point Adjusting conditions Adjusting procedure » Make the following settings: EEPROM 1.
  • Page 26 XV-DW100U Adjusting point Adjusting conditions Adjusting procedure » Select G1-GAIN and using the control switch or the RGB1 black 1. Select the following group level signal and subjects for green. button on the remote controller, adjust the signal amplitude Group : OUTPUT1 amplitude to 3.25 ±0.05 Vp-p.
  • Page 27 XV-DW100U Adjusting point Adjusting conditions Adjusting procedure » Using the control switches or the remote controller Sample-and- 1. Feed the XGA mode 75-Hz hold pulse black signal. buttons, make sure that the “OUTPUT 3” charac- phase ters are not blurry and there is no ghost image. If RCK-PHASE 2.
  • Page 28 XV-DW100U Adjusting point Adjusting conditions Adjusting procedure » Using the control switches or the remote controller Video picture 1. Feed the split color bar sig- adjustment nal. buttons, adjust the black-to-white (100%) level dif- Group : VIDEO 1 ference to 2.3 ±0.02 Vp-p.
  • Page 29 XV-DW100U Adjusting point Adjusting conditions Adjusting procedure » Using the control switches or the remote controller Tint 1. Feed the split color bar sig- nal. buttons, adjust the data to have the -(B-Y) wave- Group : VIDEO 1 form downhill straight.
  • Page 30 XV-DW100U Adjusting point Adjusting conditions Adjusting procedure » Using the control switches or the remote controller Video white 1. Feed the NTSC mono- balance scope pattern signal buttons, adjust so that the entire screen looks evenly Group : VIDEO 2 colorless.
  • Page 31 XV-DW100U Adjusting point Adjusting conditions Adjusting procedure » Select R1-GAIN and adjust the data so that the R DVD input panel 1. Feed the 10-step signal to signal amplitude the G(Y) input terminal of signal amplitude and the G signal amplitude are the BNC connector.
  • Page 32 XV-DW100U Adjusting point Adjusting conditions Adjusting procedure » Make sure that the white balance is in the best set- White balance 1. Have the following adjust- check and ment conditions: RGB input ting. Readjust the RGB input, video input and DVD...

  • Page 33: Adjusting The Pc Interface

    XV-DW100U ADJUSTING THE PC INTERFACE (CPCi-0035CE03. PC I/F Unit) 1. Setting the oscilloscope Set the range to DC 1 V/div and 5µ/div. 2. Connecting the PC Interface Fit the PC I/F in position and make sure the CON2, CON3 and CON4 connectors are all tight in place.

  • Page 34: Trouble Shooting Table

    XV-DW100U TROUBLE SHOOTING TABLE Checking the PWB performance Video input in trouble RGB input in trouble Through-output in trouble Remote control in trouble Go to "Checking the video unit Feed test pattern signal from Through-output circuit in Go to "Checking the remote circuit".

  • Page 35: Checking The Video Unit Circuit

    XV-DW100U TROUBLE SHOOTING TABLE (Continued) Checking the video system Is the lamp on? Go to "Lamp fails to light-up". Is specified voltage fed to EA connectors? Check the power circuit and its parts. Are there signal inputs at pins (7), (9)
  • Page 36 XV-DW100U TROUBLE SHOOTING TABLE (Continued) Checking IC801 (RGB signal output circuit) Are there RGB output waveforms at pins (31), (32) and (33) of IC801? Go to "No colour or unusual tone", Check the data transfer and other "No Y signal" or "Out of sync".
  • Page 37 XV-DW100U TROUBLE SHOOTING TABLE (Continued) Checking IC806 (3-D noise reduction circuit) and its peripheral circuits Are there signal inputs at pins (40) (Y signal) and (45)(chroma signal) of IC8001? Check the buffer circuit of Q6004 thru Q6006 as well as Q6001 thru Q6003.

  • Page 38: No Or Unusual Horizontal Sync

    XV-DW100U TROUBLE SHOOTING TABLE (Continued) No or unusual Y signal Is there Y signal input at pin (21) of IC801? Go back to the signal processing block. Is there Y signal output at pin (40) of IC801? Check IC801 and its peripheral circuits.
  • Page 39 XV-DW100U TROUBLE SHOOTING TABLE (Continued) Checking the output PWB unit Are there signal inputs at SC1404, SC1405, SC1501 and SC1502? Are voltages applied to EA connectors and SC8404, If there is no signal at EA If there is no signal at SC8404...

  • Page 40: No Audio Output

    XV-DW100U TROUBLE SHOOTING TABLE (Continued) No audio output Are there audio signal inputs at pins (2) and (23) of IC1301? Check the input, the switching circuit of IC441 and IC442, and their peripheral circuit. Are there audio signal outputs at pins...
  • Page 41 XV-DW100U TROUBLE SHOOTING TABLE (Continued) Checkig the Power Unit There is no voltage output at EA connector. Is EA connector disconnected or loose? Reconnect the EA connector. Is AC voltage (85-264V) applied across the PA connector? Replace F791. Is TF751 broken? Replace.
  • Page 42 XV-DW100U TROUBLE SHOOTING TABLE (Continued) Power on Is the right input selected? Select the right input with remote control. Are the PC, video and LCP cables as specified and properly connected? Use the right cables or reconnect the cables. With the contrast control at maximum, does the image appear? Readjust the video system.

  • Page 43: Lamp Fails To Light-Up

    XV-DW100U TROUBLE SHOOTING TABLE (Continued) Lamp fails to light-up Turn on the power switch. Is discharging sound heard from the lamp? Is the lamp out of socket? Is the ballast cooling fan running? Replace the Reconnect the lamp. lamp into socket.
  • Page 44 XV-DW100U TROUBLE SHOOTING TABLE FOR PC I/F UNIT-1 Checking the clock circuit and its peripheral circuits Is X8001 (6MHz) oscillating? X8001 or its peripheral part faulty. Is X8002 (32.768kHz) oscillating? X8002 or its peripheral part faulty. Is X8003 (1.84MHz) oscillating? X8003 or its peripheral part faulty.
  • Page 45 XV-DW100U TROUBLE SHOOTING TABLE FOR PC I/F UNIT-2 Checking the PLL circuit and its peripheral circuits Are there signals at pins (6) and (22) of IC8015? IC8025 or its peripheral circuit faulty. Is there signal at pin (18) and (19) of IC8015? IC8015 or its peripheral circuit faulty.
  • Page 46 XV-DW100U TROUBLE SHOOTING TABLE FOR PC I/F UNIT-3 Checking the VGA's red video circuit and its peripheral circuits Is there signal at pin (6) of IC8067? Output PWB faulty. Is there signal at the base of Q8009? IC8067 or its peripheral circuit faulty.
  • Page 47 XV-DW100U TROUBLE SHOOTING TABLE FOR PC I/F UNIT-4 Checking the VGA's green video circuit and its peripheral circuits Is there signal at pin (6) of IC8066? Output PWB faulty. Is there signal at the base of Q8007? IC8066 or its peripheral circuit faulty.
  • Page 48 XV-DW100U TROUBLE SHOOTING TABLE FOR PC I/F UNIT-5 Checking the VGA's blue video circuit and its peripheral circuits Is there signal at pin (6) of IC8065? Output PWB faulty. Is there signal at the base of Q8005? IC8065 or its peripheral circuit faulty.
  • Page 49 XV-DW100U TROUBLE SHOOTING TABLE FOR PC I/F UNIT-6 Checking the OSD circuit and its peripheral circuits Display OSD on the screen. Are there signals at pins (56), (58), (71) and (72) of IC8048 (TL54,TL53,TL52 and TL51)? IC8029 or its peripheral circuit faulty.

  • Page 50: Chassis Layout

    XV-DW100U CHASSIS LAYOUT OUTPUT UNIT PC I/F UNIT DUNTKA111DE01 CPCI-0035CE03 INLET UNIT RUNTK0656CEZZ SIGNAL UNIT DUNTK9921DE05 POWER UNIT RDENC0287CEZZ R/C RECEIVER UNIT DUNTKA113DE01 TERMINAL UNIT DUNTK9923DE05 BALLAST UNIT RDENC0286CEZZ FILTER UNIT S-OUT UNIT RDENC0288CEZZ DUNTKA112DE01...

  • Page 51: Block Diagram

    XV-DW100U BLOCK DIAGRAM...

  • Page 52: Overall Wiring Diagram

    XV-DW100U OVERALL WIRING DIARGAM...

  • Page 53: Description Of Schematic Diagram

    XV-DW100U DESCRIPTION OF SCHEMATIC DIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. Voltages at test points are measured at the supply voltage of AC 120V. Signals are fed by a color bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.
  • Page 54 XV-DW100U WAVEFORMS SC1101 7-pin SC1101 8-pin SC1201 8-pin SC1201 7-pin (RSIG5) (RSIG6) (GSIG6) (GSIG5) H : 10µsec/div H : 10µsec/div H : 10µsec/div H : 10µsec/div V : 2V/div V : 2V/div V : 2V/div V : 2V/div SC1301 7-pin...
  • Page 55 XV-DW100U Ë SIGNAL UNIT-1/4...
  • Page 56 XV-DW100U Ë SIGNAL UNIT-2/4...
  • Page 57 XV-DW100U Ë SIGNAL UNIT-3/4...
  • Page 58 XV-DW100U Ë SIGNAL UNIT-4/4...
  • Page 59 XV-DW100U Ë OUTPUT UNIT-1/7...
  • Page 60 XV-DW100U Ë OUTPUT UNIT-2/7...
  • Page 61 XV-DW100U Ë OUTPUT UNIT-3/7...
  • Page 62 XV-DW100U Ë OUTPUT UNIT-4/7...
  • Page 63 XV-DW100U Ë OUTPUT UNIT-5/7...
  • Page 64 XV-DW100U Ë OUTPUT UNIT-6/7...
  • Page 65 XV-DW100U Ë OUTPUT UNIT-7/7...
  • Page 66 XV-DW100U Ë TERMINAL UNIT-1/2...
  • Page 67 XV-DW100U Ë TERMINAL UNIT-2/2...
  • Page 68 XV-DW100U Ë SOUND OUT UNIT...
  • Page 69 XV-DW100U Ë R/C RECEIVER UNIT...
  • Page 70 XV-DW100U Ë OPERATION KEY UNIT...
  • Page 71 XV-DW100U Ë FILTER AND INLET UNIT...
  • Page 72 XV-DW100U Ë POWER UNIT...
  • Page 73 XV-DW100U Ë PC I/F UNIT-1/8...
  • Page 74 XV-DW100U Ë PC I/F UNIT-2/8...
  • Page 75 XV-DW100U Ë PC I/F UNIT-3/8...
  • Page 76 XV-DW100U Ë PC I/F UNIT-4/8...
  • Page 77 XV-DW100U Ë PC I/F UNIT-5/8...
  • Page 78 XV-DW100U Ë PC I/F UNIT-6/8...
  • Page 79 XV-DW100U Ë PC I/F UNIT-7/8...
  • Page 80 XV-DW100U Ë PC I/F UNIT-8/8...

  • Page 81: Printed Wiring Board Assemblies

    XV-DW100U PRINTED WIRING BOARD ASSEMBLIES Signal Unit (Wiring Side) Signal Unit (Component Side)
  • Page 82 XV-DW100U Terminal Unit (Wiring Side) Terminal Unit (Component Side)
  • Page 83 XV-DW100U R/C Receiver Unit (Wiring Side) Output Unit (Wiring Side)
  • Page 84 XV-DW100U R/C Receiver Unit (Component Side) Output Unit (Component Side)
  • Page 85 XV-DW100U PC I/F Unit (Wiring Side)
  • Page 86 XV-DW100U PC I/F Unit (Component Side)
  • Page 87 XV-DW100U Filter Unit (Wiring Side) Sound Out Unit (Wiring Side) Power Unit (Wiring Side)
  • Page 88 XV-DW100U Filter Unit (Component Side) Sound Out Unit (Component Side) Power Unit (Component Side)
  • Page 89 XV-DW100U Inlet Unit (Wiring Side) Inlet Unit (Component Side)

  • Page 90: Parts List

    IC6009 VHiNJM2283V-1 J NJM2283V For location of SHARP Parts Distributor, IC6010 VHiNJM2234M-1 J NJM2234M Please call Toll-Free; 1-800-BE-SHARP IC6011 VHiNJM2240M-1 J NJM2240M in CANADA: Contact SHARP Electronics of Canada Limited TRANSISTORS Phone (416) 890-2100. Q801 VS2PD601AR/-1 J 2PD601AR Q802 VS2PB709AR/-1...
  • Page 91 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTK9921DE05 C855 VCKYCY1EF104Z J 0.1 Ceramic C856 VCKYCY1EF104Z J 0.1 Ceramic SIGNAL UNIT (Continued) C858 VCE9PF1HW105M Elect. (N.P) C859 VCE9PF1HW105M Elect. (N.P) Q6011 VS2PD601AR/-1 J 2PD601AR C860...
  • Page 92 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTK9921DE05 C6033 VCKYCY1CF104Z J 0.1 Ceramic C6034 VCE9PF1HW105M Elect. (N.P) SIGNAL UNIT (Continued) C6035 VCEAPF0JW476M J 47 6.3V Electrolytic C6037 VCCCCY1HH360J J 36p Ceramic C4527 VCKYCY1CF104Z J 0.1...
  • Page 93 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTK9921DE05 R4307 VRS-CY1JF273J J 27k 1/16W Metal Oxide R4308 VRS-CY1JF153J J 15k 1/16W Metal Oxide SIGNAL UNIT (Continued) R4309 VRS-CY1JF000J 1/16W Metal Oxide R4310 VRS-CY1JF392J J 3.9k 1/16W Metal Oxide...
  • Page 94 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTK9921DE05 R6031 VRS-TV1JD122J J 1.2k 1/16W Metal Oxide R6032 VRS-CY1JF821J J 820 1/16W Metal Oxide SIGNAL UNIT (Continued) R6033 VRS-CY1JF122J J 1.2k 1/16W Metal Oxide R6034 VRS-CY1JF102J...
  • Page 95 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 IC7202 VHiPQ20VZ11-1 J PQ20VZ11 IC7203 VHiPQ20VZ11-1 J PQ20VZ11 OUTPUT UNIT IC7204 VHiPQ20VZ11-1 J PQ20VZ11 IC7205 RH-iX2296CEZZ J TC7S66F INTEGRATED CIRCUITS IC7207 VHiPQ20VZ11-1 J PQ20VZ11 IC7208 VHiPQ20VZ11-1...
  • Page 96 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 D5013 VHDHRW0702A-1 J Diode D5014 VHDMA153///-1 J Diode OUTPUT UNIT (Continued) D5015 VHDMA153///-1 J Diode D5016 VHDMA153///-1 J Diode Q4101 VS2PB709AR/-1 J 2PB709AR D5017 VHDMA153///-1 J Diode...
  • Page 97 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 C1619 VCKYCY1CF104Z J 0.1 Ceramic C1620 VCKYCY1CF104Z J 0.1 Ceramic OUTPUT UNIT (Continued) C1621 VCKYCY1CF104Z J 0.1 Ceramic C1622 VCCCCY1HH100D J 10p Ceramic C1109 VCKYCY1CF104Z J 0.1...
  • Page 98 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 C5004 VCKYCY1CF104Z J 0.1 Ceramic C5101 VCEAPF1CW106M J 10 Electrolytic OUTPUT UNIT (Continued) C5102 VCEAPF0JW107M J 100 6.3V Electrolytic C5103 VCKYCY1HB103K J 0.01 Ceramic C2317 VCKYCY1CF104Z J 0.1...
  • Page 99 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 R309 VRS-CY1JF102J J 1k 1/16W Metal Oxide R310 VRS-CY1JF102J J 1k 1/16W Metal Oxide OUTPUT UNIT (Continued) R313 VRS-CY1JF103J J 10k 1/16W Metal Oxide R314 VRS-CY1JF103J...
  • Page 100 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 R1279 VRS-CY1JF000J 1/16W Metal Oxide R1280 VRS-CY1JF100J J 10 1/16W Metal Oxide OUTPUT UNIT (Continued) R1284 VRS-CY1JF100J J 10 1/16W Metal Oxide R1285 VRS-CY1JF100J J 10...
  • Page 101 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 R1693 VRS-CY1JF103J J 10k 1/16W Metal Oxide R1697 VRS-CY1JF122J J 1.2k 1/16W Metal Oxide OUTPUT UNIT (Continued) R1698 VRS-CY1JF103J J 10k 1/16W Metal Oxide R1699 VRS-CY1JF102J...
  • Page 102 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 R2457 VRS-CY1JF273J J 27k 1/16W Metal Oxide R2458 VRS-CY1JF223J J 22k 1/16W Metal Oxide OUTPUT UNIT (Continued) R2459 VRS-CY1JF102J J 1k 1/16W Metal Oxide R2460 VRS-CY1JF102J...
  • Page 103 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 R5304 VRS-CY1JF000J 1/16W Metal Oxide R5305 VRS-CY1JF101J J 100 1/16W Metal Oxide OUTPUT UNIT (Continued) R5306 VRS-CY1JF101J J 100 1/16W Metal Oxide R5308 VRS-CY1JF272J J 2.7k 1/16W Metal Oxide...
  • Page 104 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 R7076 VRS-CY1JF103J J 10k 1/16W Metal Oxide R7077 VRS-CY1JF103J J 10k 1/16W Metal Oxide OUTPUT UNIT (Continued) R7079 VRS-CR3AD4R7J J 4.7 Metal Oxide R7080 VRS-CR3AD4R7J J 4.7...
  • Page 105 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA111DE01 FB7207 RBLN-0062CEZZ J Ferrite Bead FB7208 RBLN-0065CEZZ J Ferrite Bead OUTPUT UNIT (Continued) FB7209 RBLN-0065CEZZ J Ferrite Bead FB7210 RBLN-0065CEZZ J Ferrite Bead R7255 VRS-CY1JF472J J 4.7k 1/16W Metal Oxide...

  • Page 106: Terminal Unit

    XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTK9923DE05 D3005 VHDMA157A//-1 J Diode D3006 VHDMA157A//-1 J Diode TERMINAL UNIT D3007 VHDMA157A//-1 J Diode D3201 VHDMA157A//-1 J Diode INTEGRATED CIRCUITS D3202 VHDMA157A//-1 J Diode D3203 VHDMA157A//-1...
  • Page 107 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTK9923DE05 C4035 VCKYCY1CF104Z J 0.1 Ceramic C4036 VCKYCY1CF104Z J 0.1 Ceramic TERMINAL UNIT (Continued) C4037 VCEAPF1CW106M J 10 Electrolytic C4038 VCKYCY1CF104Z J 0.1 Ceramic C453 VCKYCY1CF104Z J 0.1...
  • Page 108 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTK9923DE05 R3253 VRS-CY1JF152J J 1.5k 1/16W Metal Oxide R3401 VRS-CY1JF101J J 100 1/16W Metal Oxide TERMINAL UNIT (Continued) R3402 VRS-CY1JF101J J 100 1/16W Metal Oxide R3403 VRS-CY1JF101J...
  • Page 109 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTK9923DE05 DUNTKA112DE01 TERMINAL UNIT (Continued) SOUND OUT UNIT INTEGRATED CIRCUIT R4059 VRS-CY1JF560J J 56 1/16W Metal Oxide R4060 VRS-CY1JF332J J 3.3k 1/16W Metal Oxide IC302 VHiTDA1517/-2 J TDA1517/N2 R5550 VRS-CY1JF472J J 4.7k 1/16W Metal Oxide...

  • Page 110: Power Unit

    XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code RDENC0287CEZZ C719 9FJ0C01402193 J 470 Electrolytic C720 9FJ0C01402193 J 470 Electrolytic POWER UNIT C721 9FJ0C01510165 J 47 Electrolytic C722 9FJ0C01302085 J 470 Electrolytic INTEGRATED CIRCUITS C723 9FJ0C01510165...

  • Page 111: Filter Unit

    XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code RDENC0288CEZZ R780 9FJ0R91001255 J 390k 1/10W Chip R781 9FJ0R91001255 J 390k 1/10W Chip FILTER UNIT R782 9FJ0R91001265 J 240k 1/10W Chip R783 9FJ0R91001265 J 240k 1/10W Chip...
  • Page 112 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CPCi-0035CE03 X8005 9DK001-80014 J Crystal, 16.25MHz PC I/F UNIT FILTERS FL8002 9DK001-82020 J Filter, BMK351 INTEGRATED CIRCUITS FL8003 9DK001-82020 J Filter, BMK351 IC8001 RH-iX3270CEZZ J HD6417709 FL8005 9DK001-82020...
  • Page 113 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CPCi-0035CE03 C8139 9DK001-42094 J 0.1 25V Ceramic C8140 9DK001-42094 J 0.1 25V Ceramic PC I/F UNIT (Continued) C8141 9DK001-42094 J 0.1 25V Ceramic C8142 9DK001-42094 J 0.1...
  • Page 114 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CPCi-0035CE03 C8305 9DK001-42096 J 0.01 50V Ceramic C8306 9DK001-42096 J 0.01 50V Ceramic PC I/F UNIT (Continued) C8307 9DK001-42096 J 0.01 50V Ceramic C8308 9DK001-42096 J 0.01...
  • Page 115 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CPCi-0035CE03 R8035 9DK001-51030 J 10k 1/16W Resistor Array AD R8036 9DK001-51030 J 10k 1/16W Resistor Array AD PC I/F UNIT (Continued) R8037 9DK001-51032 J 47k 1/16W Resistor Array AD...
  • Page 116 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CPCi-0035CE03 R8212 9DK001-50212 J 100k 1/16W Chip 1608 R8214 9DK001-50212 J 100k 1/16W Chip 1608 PC I/F UNIT (Continued) R8215 9DK001-51030 J 10k 1/16W Resistor Array AD...
  • Page 117 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CPCi-0035CE03 R8430 9DK001-50185 J 10k 1/16W Chip 1608 R8433 9DK001-50218 J 20k 1/16W Chip 1608 PC I/F UNIT (Continued) R8435 9DK001-50185 J 10k 1/16W Chip 1608 R8436 9DK001-50185...
  • Page 118 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code 3-20 XEBSD30P14000 J Screw, x8 CABINET AND MECHANICAL PARTS 3-21 XRESJ30-06000 J E-Ring, x2 CCOVA1818CE04 J Lamp Cage Cover Ass’y Not Available – Top Cabinet Ass’y —...

  • Page 119: Ë Cabinet And Mechanical Parts

    XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CABINET AND MECHANICAL PARTS 2-1-3 2-1-2 2-1-4 1-1-9 2-1-1 1-1-10 1-1-6 1-1-8 1-1-6 1-1-7 1-1-11 1-1-4 1-1-3 1-1-1 1-1-2 1-11 1-1-3 1-11 1-10 3-21 3-11 3-12 3-10...
  • Page 120 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code CABINET AND MECHANICAL PARTS (Continued) NSFTZ0134CEFW J Shaft, for D-Sub, x6 XBPSD40P08JS0 J Screw XBPSD30P04000 J Screw 9FJ0N00001960 J Shield Case 9FJ0L13901320 J Shield Board 9FJ0S89000020 J Screw...
  • Page 121 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code 6-60 NFANS0006CE00 J Fan OPTICS MECHANISM PARTS 6-61 LANGK0682CEFW J Fan Plate 6-62 XBPSD40P20000 J Screw, x2 6-63 LHLDW1046CEZZ J Wire Holder CCHSK0062CE07 J Optics Macha. Ass’y...
  • Page 122 XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code OPTICS MECHANISM PARTS...

  • Page 123: Operation Manual

    XV-DW100U Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKING PARTS SUPPLIED ACCESORRIES (NOT REPLACEMENT ITEM) ACCESSORIES SPAKC5397CEZZ – Packing Case — SPAKP0805CEZZ – Polystyrene Cover — PFiLD0080CEZZ J Extra Air Filter SPAKX2824CEZZ – Buffer Material —...

  • Page 124: Packing Of The Set

    Part No. Description Code PACKING OF THE SET Extra Air Filter Guarantee Card Operation Manual Register Card (U.S.A) SHARP Logo Label (Inverted Label) Terminal Cover Sleeve AC Cord (Box for Accessories) AV Cable DIN-D-Sub RS-232C Cable Computer Cable Wireless R/C Unit...
  • Page 125 Code Ref. No. Part No. Description Code COPYRIGHT © 2000 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

Table of Contents