Setting Valve Clearance - FENDT MAN D 0836 LE Workshop Manual

Fav 900 chassis number 23/3001 and up
Fav 900
PM-Picturemodule
PMTAB_Picture
PM-Picturemodule
PMTAB_Picture
Text-module
Setting valves clearance:
1 5 3
6 2 4
Valves overlap on cylinder:
PM-Picturemodule
PMTAB_Picture
Date Version Page
15.2.2001 a 1/2
Engine / Cylinder head

Setting valve clearance

6 2 4
1 5 3
Setting valve clearance
Engine must be cold for adjusting valve clearance.
(max. coolant temperature 50° C (122°F))
Setting valve clearance.
Rotate crankshaft using turning device until the
piston of the cylinder to be set is at top dead
centre ( TDC ) and the rocker arms are not loaded.
The valves of the synchronous cylinder are now
overlapping.
Layout of cylinder sequence and position of valves
I Fan end
II Flywheel end
A Exhaust valve
E Intake valve
Setting and Calibration
F
Capitel Index Docu-No.
2010 F 000003