FENDT MAN D 0836 LE Workshop Manual page 119

Fav 900 Chassis Number 23/3001 and up
Fav 900
PM-Picturemodule
PMTAB_Picture
PM-Picturemodule
PMTAB_Picture
PM-Picturemodule
PMTAB_Picture
PM-Picturemodule
PMTAB_Picture
Date Version Page
01/2000 b 5/7
Engine / Injection Pump
Checking Start of Delivery VP 44
Turn crank shaft back by at least 20° before TDP
and then set dial gauge with adaptor
(X 899.980.245.000) into the TDP measuring
hole.
Note:
Use dial gauge with ball tip R=1 mm (0.039").
Set dial gauge into "0" display position.
Turn crankshaft back toward TDP until
displacement (X . XX) which is indicated on the
injection pump will be reached .
E.g. : Indicated value on injection pump: 0.79
Consequently : Adjust TDP to reach 0,79 mm on
dial gauge
Note:
Scanning head of dial gauge runs into slanted
surface of the control shaft.
Do not turn crankshaft any further , risk of
shearing the scanning head of the dial gauge.
Start of Delivery point is wrong!
Requested value start of delivery: TDP (+/- 0,5°)
Checking Start of Delivery VP 44
Testing
E
Capitel Index Docu-No.
2710 E 000003