FENDT MAN D 0836 LE Workshop Manual page 27

Fav 900 from chassis number 23/3001and up
Fav 900
Cylinder head bolts
Tightening cylinder head bolts following repair work (new engine)
Only for Torx-head screws.
No tightening for Torx-head screws.
Tightening cylinder head bolts following repair work
(cold engine)
Only for Torx-head screws.
PM-Picturemodule
PMTAB_Picture
PM-Picturemodule
PMTAB_Picture
Text-module
Tightening cylinder head bolts following repair work
Only for Torx-heads.
No tightening for Torx-head screws.
Date Version Page
13/03/2001 a 4/4
Engine / Generalities
Tightening Torque values
Note:
Only use new cylinder head bolts. do not re -
use.
before inserting bolts, lubricate threads (not the
tapped bores) and the bolt heads with "Optimoly
White T" paste. Do not use oils or additives
containing MoS
angle method following the diagram :
1.st initial stage = 10 Nm (7,38 lbf-ft).
2.nd initial stage = 80 Nm (59,00 lbf-ft).
3.rd initial stage = 150 Nm (110,63 lbf-ft).
4.tth initial stage = 90°.
5.th initial stage = 90°.
Final stage = 90°.
Adjust valve play
Put on sticker number 51.97801-0150.
Tightening Torque values
-h. Tighten bolts by the torque
2
Index
Capitel
2000 A
General
A
Docu-No.
000007