Connecting Power - ShoreTel Mobility Router 4000 Hardware Installation Manual

1.8

Connecting Power

To connect AC power:
1
Insert the female end of the power cord into the back of the Mobility Router.
2
Connect the other end of the power cord into an appropriate AC power source.
Figure 1-7. Connecting Power
3
The Mobility Router automatically powers on. As the Mobility Router starts up, messages
display in the terminal emulation software window. Use the initial configuration wizard
to initially configure the Mobility Router with
on page
ShoreTel Mobility Router 4000 Series Hardware Installation Guide
ShoreTel Mobility Router 4000 Installation
11.
Connecting Power
"Using the Initial Configuration Wizard"
1
9