Pioneer DVR-RT502 Operating Instructions Manual page 59

Recording
Setting the timer program using the VCR Plus+
system
The VCR Plus+ system simplifies timer recording so
that you just enter a PlusCode number (which you can
find in your TV listings guide) for the program you want
to record, tell the recorder whether you want to record it
just once or regularly, and then select the DVD or the
VCR for recording.
Note that for the VCR Plus+ system to work correctly,
the clock must be set to the right time and the guide
channels must be setup (see Checking the channel
setup to use the VCR Plus+ system above).
1 Press VCR Plus+.
If a PROGRAM FULL message appears then you'll need
to delete one of the existing timer programs before
continuing. Select a timer program from the list and
press CANCEL.
2 Use the number buttons to enter the PlusCode
number.
VCR Plus+
PlusCode# 1 - - - - - - - -
ONCE
TYPE
OK
0 - 9
SELECT
RETURN
3 Press to select "TYPE".
VCR Plus+
PlusCode# 1 2 3 4 5 6 7 8 9
TYPE ONCE
ONCE
OK
OK
DAILY
WEEKLY
SELECT
ENTER ENTER RETURN
Here you can set whether you want to record the
program ONCE, DAILY or WEEKLY. If you want to change
it, press ENTER then use the
then press ENTER again.
INPUT NO. CANCEL DELETE
VCR
BACK END
Plus+
VCR
BACK END
Plus+
/
buttons to select,
4 Press to highlight OK, then press ENTER.
VCR Plus+
PlusCode#
1 2 3 4 5 6 7 8 9
TYPE ONCE
OK
SELECT
ENTER ENTER RETURN
If you've entered a valid PlusCode number, a summary
of the timer recording appears. You can edit any of this
information as necessary. Use the
select the item you want to edit, press ENTER, then use
/ /
the or buttons as appropriate to select, then
press ENTER again.
VCR Plus+
TYPE
DATE (MM/DD) 09/27(SA)
START
END
CH
REC TO
REC MODE
OK
SELECT
ENTER ENTER RETURN
• TYPE – select the frequency of the recording (more
options available here than in the previous screen,
such as every weekday)
• DATE (MM/DD) – the recording date
• START – recording start time
• END – recording end time
• CH – the channel to be recorded, or one of the
external inputs (L1 or L2)
• REC TO – record to the DVD or the VCR
• REC MODE – recording quality
• Note that If you haven't set a guide channel for the
selected TV channel, the CH field will be blank (—).
In this case, set the channel number manually.
5 Highlight OK and press ENTER.
The TIMER REC SET screen appears and you should see
the new timer recording in the list.
SETUP MENU
TIMER REC SET
DATE START
NEW
09/27(SA) 01:35
MON-SAT 15:00
SUN 17:00
09/27(SA) 01:54
6 Press SETUP to exit.
VCR
BACK END
Plus+
/
buttons to
ONCE
01:54AM
02:54AM
07
DVD
XP
VCR
BACK END
Plus+
REC REC
END CH TO MODE
02:35 80 DVD EP
16:00 08 VCR SP
18:00 12 DVD XP
02:54 07 DVD XP
06
59
En