Vcr Plus+ ® Programming System - Pioneer DVR-RT502 Operating Instructions Manual

Recording
06
VCR Plus+ ® programming system
RAM VR mode Video mode
What is the VCR Plus+ programming system?
VCR Plus+ system is a timer programming system
which simplifies timer recording programming. Instead
of entering the date, channel and recording time, you
simply enter a PlusCode
you can find in your TV listings.
Checking the channel setup to use the VCR Plus+
system
Before you can use the VCR Plus+ system you need to
set up the channel mapping. This ensures that the VCR
Plus+ system uses the correct channels for recording by
matching up the preset channels in the recorder with
'guide channels'. You can find these guide channel
numbers in your local TV guide or newspaper TV listings.
1 Press SETUP and press
SETUP" and press ENTER.
The Channel Setup menu will appear.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
TV/CABLE SELECT
AV SETUP
AUTO CH MEMORY
REC SETUP ADD/DELETE
GUIDE CH SET
CH SETUP
OTHER
SELECT
ENTER ENTER
58
En
DVD-R VCR
® programming number that
or to select "CH
CH SETUP
CABLE
PROCEED
PROCEED
PROCEED
RETURN BACK SETUP END
2 Press or to select "GUIDE CH SET" and press
ENTER.
A window appears to set a guide channel number and
the corresponding tuner channel number.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
TV/CABLE SELECT GUIDE CH NO.
AV SETUP
AUTO CH MEMORY
TUNER CH NO.
REC SETUP ADD/DELETE
GUIDE CH SET
CH SETUP
OTHER
0 - 9
SELECT
ENTER ENTER RETURN
3 Enter a GUIDE CH NO. (guide channel number).
SETUP MENU
TIMER REC SET
SYSTEM SETUP
TV/CABLE SELECT GUIDE CH NO.
AV SETUP
AUTO CH MEMORY
TUNER CH NO.
ADD/DELETE
REC SETUP
GUIDE CH SET
CH SETUP
OTHER
There are two ways to do this:
• To select numbers you can either use the number
buttons and then ENTER, or you can press ENTER
/
first then use the
followed by ENTER.
• When using the number buttons, enter using three
digits—use leading zeros for numbers less than
100.
4 Press to highlight TUNER CH. NO., then enter
the corresponding tuner channel number.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
TV/CABLE SELECT
GUIDE CH NO.
AV SETUP
AUTO CH MEMORY
TUNER CH NO.
REC SETUP ADD/DELETE
GUIDE CH SET
CH SETUP
OTHER
0 - 9
SELECT
ENTER ENTER RETURN
• Select a tuner channel number in the same way as
you selected the guide channel number.
• You can also select one of the LINE inputs (LINE 1
or LINE 2) instead of a channel number if some
channels are received via an external receiver.
5 Repeat steps 3 – 4 to input the rest of the
channel list.
6 Press to highlight OK and press ENTER.
7 When you're done, press SETUP to exit.
CH SETUP
001 CABLE
PROCEED
- - -
PROCEED
OK
PROCEED
INPUT NO.
BACK SETUP END
CH SETUP
001 CABLE
PROCEED
- - -
PROCEED
OK
PROCEED
buttons to select a number,
CH SETUP
001 CABLE
PROCEED
- - -
PROCEED
OK
PROCEED
INPUT NO. CANCEL DELETE
BACK SETUP END