Pioneer DVR-RT502 Operating Instructions Manual page 87

Additional information
ERROR/WARNING
MESSAGE
CANNOT RECORD
PROTECTED IMAGE
RECORDING INTERRUPTED
PROTECTED IMAGE
CANNOT RECORD IN VIDEO
MODE.
COPY IMAGE ONCE ONLY.
CANNOT RECORD ON DISC.
THIS IS NOT CPRM DISC.
TIMER RECORDING ERROR
PLEASE CHCK THE DISC OR
TAPE
OPERATION HALTED TO
START T-REC
Dubbing
SWITCHING TO INTERLACE
OUTPUT FOR COPYING
CANNOT COPY DATA - C251
CANNOT COPY DATA -
C254, C255
COPYING INTERRUPTED
Disc setup DISC ERROR - C302
DISC ERROR - C304
DISC ERROR - C306
DISC ERROR - C307, C308
Title Menu CANNOT EDIT
PROCESSING
PLEASE WAIT
Note
• Any error/warning message other than those above might appear. Take measures against such a message by
seeing the possible solutions above.
CAUSE
You tried to record a copy-guard
video.
The video was changed to a copy-
guard format in recording.
Recording was attempted of a
"Copy Once" program onto a disc
(Video mode).
Recording was attempted of a
"Copy Once" program onto a disc
without CPRM.
When a recordable tape is not
inserted or no disc space is
available, TIMER REC was pressed
From about 6 minutes before DVD
timer recording starts, DVD
playback cannot be done.
Dubbing was initiated from a disc
to a video tape in the progressive
scan mode.
No video tape or disc is inserted
as a source for the recording.
The source video or disc to be cop-
ied is copy-guarded.
The video tape or disc became full
during dubbing.
Cannot Format disc due to a
scratch or contamination on the
disc.
Cannot Finalize disc due to a
scratch or contamination on the
disc.
Cannot Undo Finalize disc due to
a scratch or contamination on the
disc.
Cannot Protect disc ON/OFF due
to a scratch or contamination on
the disc.
Editing cannot be performed due
to a scratch or contamination on
the disc.
A process requiring a longer time
such as editing is being per-
formed.
POSSIBLE SOLUTIONS
You cannot record to the video
containing copy-guard signal.
You cannot record to the video
containing copy-guard signal.
Load a DVD-RW Ver. 1.1/1.2(VR
mode) with CPRM.
Load a DVD-RW Ver. 1.1/1.2(VR
mode) with CPRM.
Load a recordabl tape or disc.
You cannot playback the disc
from about 6 minutes before DVD
timer recording starts.
The mode is automatically
changed to interlaced mode if
dubbing from a disc to a video
tape.
Load a video tape or disc into the
source drive.
You cannot dub a video contain-
ing copy-guarded material.
Load another video tape or disc
for recording and restart.
Check the disc and reload it, or
use another disc for recording.
Check the disc and reload it, or
use another disc for recording.
Check the disc and reload it, or
use another disc for recording.
Check the disc and reload it, or
use another disc for recording.
Check the disc and reload it, or
use another disc for recording.
Wait until the process is com-
plete.
09
PAGE
54
54
54
54
60, 62
60, 62
81
80, 81
54
80, 81
--
--
--
--
--
--
87
En