Loading And Unloading A Cassette Tape; Loading; Unloading - Pioneer DVR-RT502 Operating Instructions Manual

Playback

Loading and unloading a cassette tape

VCR
Use only video cassette tapes marked
.
• Cassettes marked "VHS" (or "S-VHS") can be used
with this video cassette recorder. However, S-VHS
recording is not possible with this model.
• This model is equipped with SQPB (S-VHS QUASI
PLAYBACK) that makes it possible to playback S-
VHS recordings with regular VHS resolution.
• HQ VHS is compatible with existing VHS equip-
ment.

Loading

Push the center of the tape until it is automatically
inserted.
P
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Erase prevention tab
Automatic power ON
When you insert a cassette tape the VCR power will turn
ON automatically.
Automatic playback
When loading a cassette tape without an erase preven-
tion tab, playback will start automatically.
Tape speed and maximum recording time
We do not recommend using video tapes longer than 160 minutes.
Tape Speed
SP (Standard Play)
2-2/3 hours
EP (Expanded Play)
and
T-160 T-120
2 hours
8 hours 6 hours

Unloading

You can eject the video tape while the unit is turned off.
1 Press EJECT on the unit or the remote control.
2 Remove the cassette tape.
Automatic tape eject
This VCR will automatically rewind the tape when the
tape has ended. And when the tape is rewound to its
beginning, the cassette tape will be ejected automati-
cally.
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Erase prevention tab
To record again
Cover the hole with a piece of adhesive tape.
Adhesive Tape
Video cassette tape
T-90 T-60
1-1/2 hours 1 hour
4-1/2 hours 3 hours
05
Screwdriver
T-30
30 minutes
1-1/2 hours
49
En