Line1 Input/Line2 Input; Setting The Image Quality; Brightness; Black Level Control (Play) - Pioneer DVR-RT502 Operating Instructions Manual

Getting started
04

LINE1 INPUT/LINE2 INPUT

This unit comes with an S-Video input jack and Video
input jack. When you use an S-Video or Video input jack,
you must select the input mode.
Select "LINE1 INPUT" ("LINE2 INPUT") and select the
mode from the following list.
S-VIDEO
The video signal is input to the S-Video input jack as
priority.
VIDEO
The video signal is input only to the video input jack.

Setting the image quality

This section describes image quality settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "AV SETUP 2" in "AV SETUP". For the
procedure, see steps 1 to 3 in "Using the SETUP
MENU" on page 23.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
ENTER
ENTER

BRIGHTNESS

You can control the brightness level of the image.
Select "BRIGHTNESS" and select the level from the list
below.
MAX: The image becomes brighter.
STD: The image is of standard brightness.
MIN: The image becomes darker.
30
En
AV SETUP 2
STD
BRIGHTNESS

BLACK LEVEL CONTROL (PLAY)

OFF
RETURN BACK SETUP END
BLACK LEVEL CONTROL (PLAY)
To select the black level of playback pictures, set your
preference and monitor's ability.
ON: Enhanced grey scale (0 IRE cut off)
OFF: Standard grey scale (7.5 IRE cut off)
Note
The BLACK LEVEL CONTROL (PLAY) function only works
when playing back DVD-Video, DVD-RAM/RW/R and
JPEG/DivX ® -CD.

Setting the audio

This section describes audio settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "AUDIO" from "AV SETUP". For the proce-
dure, see steps 1 to 3 in "Using the SETUP MENU"
on page 23.
SETUP MENU
TIMER REC SET
SYSTEM SETUP

DRC

AV SETUP
EXTERNAL AUDIO INPUT
SAP
REC SETUP
DOLBY DIGITAL OUTPUT
CH SETUP
OTHER
SELECT
ENTER ENTER RETURN
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
Select "DRC" and select the level from the list below.
MAX: Full dynamic range is maintained.
STD: Full dynamic range is reduced.
TV: Dynamic range is reduced.
Note
• This function works only during playback of Dolby
Digital recorded discs.
• When you listen to the sound from TV's speaker, we
recommend that you select "TV".
• The level of Dynamic Range Reduction may differ
depending on the DVD.
AUDIO
STD
STEREO
OFF
DOLBY DIGITAL
BACK SETUP END