Monitor Installation - ViewSonic A90f+-1 VCDTS23307-2R Service Manual

5-2 Monitor Installation

How to install the connections to your PC
1. Your monitor has two connection cables:
A signal cable which connects to your computer's VGA connector.
A power cord which connect to the wall outlet.
2. To ensure your safety when connecting the cable, always following these five steps:
( ) .Turn off the power to your computer and peripheral equipment.
( ). Position the monitor and computer so that you can easily access the rear side of each unit.
( ).Connect the blue-colored video signal cable D-sub connector to the signal connector on the graphics
board (VGA connector) on your computer. (See your system user's guide for the exact location of your
VGA connector.)
( ).Tighten the screws on the signal cable connector to prevent it from loose, and to keep out from radio and
TV interference.
( ).To connect Power Cord between your monitor and wall outlet, you have to connect the power cord to the
monitor power input socket on back of the monitor. Plug the other end of the power cord into your surge
protector or properly-grounded electrical outlet.
ViewSonic Corporation
12
Confidential – Do Not Copy
A90f+-1