NERGY Electronic Warranty Registration Register your monitor at www.viewsonic.com. It’s fast, easy, and will simplify future support needs. The serial number of this product is on the back of the monitor. Write the serial number of this unit in the space below and keep this booklet as a permanent record of your purchase to aid in identification in the event of theft or loss.
Page 3
If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you purchased your monitor. Cord Type Size of Conductors In Cord Table A Maximum Current Rating of Unit 18AWG 16AWG 14AWG 18AWG 17AWG 10Amps 12Amps 12Amps 10Amps 12Amps ViewSonic EF70...
Handle correctly in accordance with the instruction manual. *EMI : Electromagnetic Interference *ESD : Electrostatic Discharge *RF : Radio Frequency *F/B : Fast Burst ViewSonic EF70 FCC Information FCC Warning:...
Customer Support ........back cover *To meet your future needs, and to receive any additional product information as it becomes available, please register your monitor's warranty on the Internet at: http://www.viewsonic.com. Getting Started...
Getting Started Getting Started Congratulations on your purchase of a ViewSonic EF70 color monitor. Important! Save the original box and all packing material for future shipping needs. NOTE: This product was designed for operation in the magnetic fields of the hemisphere where it was purchased.
(monitor before computer) is very important. NOTE: At this point Windows users may receive a message asking them to install the EF70’s INF file. 4 Install INF and ICM files • For CD-ROM: Insert the CD-ROM into your system, wait for it to auto- start, select “Monitor Drivers,”...
Wait 20 minutes before turning the monitor on again to prevent possible damage. To manually degauss the monitor, see page 9. ViewSonic EF70 Press button [2] to display the control screen for the highlighted control.
Page 9
] increases width of image. ] moves screen image to right. ] increases height of image. ] moves screen image up. ] curves vertical edges ] curves vertical edges to the right. ] slants vertical edges to right. ViewSonic EF70...
Page 10
Do not degauss repeatedly. Doing so can be harmful to the monitor. ® VIEWMETER (Display Frequency) displays signal input coming from your computer. Press button [2] to select this feature. ViewSonic EF70 ] rotates image Operation...
Page 11
[2] to return to the main menu. Operation ® COLOR provides three color adjustment modes or [ ® of OnView screens can be set to English, French, ViewSonic EF70...
VESA 800 x 600 @ 75Hz, 85Hz Macintosh computers require a ViewSonic vsparts@viewsonic.com or contact ViewSonic Customer Support. See the back cover. Warning: Do not set the graphics card in your computer to exceed these maximum refresh rates. Doing so may result in permanent damage to the monitor. NI= Non Interlaced.
Connect the monitor to another computer. Select Degauss from the Main Menu. Do this only once. • • If you have an older graphics card, contact ViewSonic for a non-DDC adapter. Entire screen image scrolls (rolls) vertically • Make sure video input signals are within the monitor's specified frequency range.
Some chemical cleaners have been reported to damage the screen and/or case of the monitor. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
re19-5(om outside U)55-5(.)-2.5(S)7-5(.)0.4(ow a Canadae,)]Tj/F Customer Service To receive the most prompt assistance, dial the appropriate number below and listen to all menu options1w 01/2000...
Need help?
Do you have a question about the EF70 and is the answer not in the manual?
Questions and answers