Support; Specifications - Nevir NVR-7017 TTCU User Manual

Support

Problem
No signal found
No picture or sound
Encrypted channel message
No response from remote control
Square blocks in picture or picture
freezes

Specifications

Input Frequency
Display Device
Screen Size
Screen pixels
Video output
Audio output
Power Voltage
Power consumption
Size
This symbol indicates that when the end-user wishes to discard this product, it must be sent to
separate collection facilities for recovery and recycling. By separating this product from other
household-type waste, the volume of waste sent to incinerators or land-fills will be reduced
and natural resources will thus be conserved.
In order to fulfill ruling UNE EN-60065, we indicate that if the flexible wire is damaged, it can only be
substituted by a technical service recognized by NEVIR, S.A., as per special tooling is required.
Probable cause
Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
Viewing incorrect output
It is a pay per view channel
Set top box is switched off
Remote control is not aimed correctly
Front panel obstructed
Remote control batteries inserted incorrectly
Remote control batteries exhausted
Aerial may not be compatable
Aerial is damaged/misaligned
VHF: 174MHZ-230MHZ, UHF: 470MHZ-862MHZ
Color TFT-LED
7 inches
480x234 pix
1Vp-p(75 Ω)
2CH
DC IN 12V
≥12W
220X125X31.5MM
Specifications are subject to change without notice.
14
What to do
Check aerial lead
Check aerial
Check with dealer
Press the SOURCE button
Press the SCREEN button
Press the SPEAKER button
Select an alternative channel
Plug in and turn on set top box
Aim remote control at front panel
Check for obstructions
Check batteries are inserted correctly
Replace remote control batteries
Check with dealer
Check aerial