User Interface; Quick Installation - Nevir NVR-7017 TTCU User Manual

User Interface

1.Quick Installation

1.1 Setting Country and Language
User can select preferred country and language at Setup - Installation page.
(1) Press <Menu> button to enter Main Menu.
(2) Press <Left/Right/Up/Down> to select different sub-menu.(
(3) Press <OK> button to enter the selected sub-menu.
(4) Press <Menu/Exit> to exit the current menu.
If there is no channel database in the STB, it will show Installation menu directly when booting.
See Figure
2. You can press <OK> button to start Auto Scan or <GREEN> button to start Manual Scan.
Figure 1. Main Menu - SETUP
1.2 How to receive the programs?
Scan the possible frequency and bandwidth to receive the programs.
Press <OK> or <GREEN> button to start Auto Scan or Manual Scan.
1.2.1 Auto Scan
Auto Scan will erase the database first, and scans default frequency and bandwidth by
Country Setting. Follow the steps(1) - (4) at section 1.1. Then Press <OK> button to confirm
to clear the current database and start Auto Scan.
It costs time to do Auto Scan, user can press <Exit> button to exit at anytime. See Figure 3.
Later if you want to scan again, you can follow above Quick Installation procedure.
Figure 3. Clear database message
1.2.2 Manual Scan
Manual Scan adds the scanning results into database, it doesn't erase the database.
But the User has to know the Frequency and Bandwidth for scanning. If the user scans the
same Frequency and Bandwidth more than once, the previous programs will be overwritten.
Follow the steps (1) - (4) at scetion 1.1.
(5) Press <Up/Down> to select different option
(6) Press <Left/Right> button to select different values
(7) Press <0-9> to input the frequency.
(8) Press <OK/Exit> button to start Manual Scan or exit. See Figure 4.
See Figure 1
Figure 2. SETUP - Installation
Figure 4. Manual Scan edit
5
)