Nevir NVR-7017 TTCU User Manual page 33

2.2.2 TV Setup
Setup the display mode for TV. See Figure 5.
2.2.2.1 TV Mode
Set PAL, NTSC or AUTO for display. AUTO will switch PAL or NTSC by program content.
This setting should be matched with user's TV.
2.2.2.2 OSD Transparency
Set the On Screen Display transparency. 1 is the most transparent.
2.2.2.3 Banner Display Time
Set Banner displays time. Banner doesn't disappear when set as "Always" and disappears
at timeout when set as other values.
2.2.3 Password
Set password for menu lock or channel lock or censorship lock. And the user can change
password here, the default PIN Code is 6666. See Figure 6.
Figure 5. TV Setup
2.2.3.1 Menu Lock : Lock the menus by password.
2.2.3.2 Channel Lock
Lock the channel which has been set to lock status when turning on the Channel Lock. Please
see section 2.3.1.2 for details.
2.2.3.3 Censorship Lock
Lock the program by password and censorship threshold. The censorship info is in program
content. Under the censorship rating, user has to enter the right password for watching program.
2.2.3 .4 Change Password
To change the PIN code, select this option, press <Left/Right> button to trigger changing
password and <0~9> buttons to enter old password, new password and confirm new
password. If succeed, the PIN Code Changed message will be displayed, otherwise the PIN Code
Error message will be displayed.
2.2.4 Advance Timer
User can set timer for watching the program by date and time manually or from the TV/Radio
Guide(see section 2.3.2). When setting date and start time is arrived, STB will automatically
switch to the wanted program. Press any key except <Vol-/Vol+/Mute> button, STB asks user to
abort it or not when watching booked program. User can delete the event while it isn't at
running.
2.2.5 Set Default
Restore STB to factory default. All settings did by user will be restored to factory default values
and the database will be erased together.
Figure 6. Password Page
7