Convergence And Focus Adjustments Mechanism - Sharp XG-V10WU Service Manual

XG-V10WU
AN-SD1U/S422U
Notes :
1 The eccentric cam is used for convergence adjustment. This means that the cam's turning and the linear
movement are not always uniform.
2 This model is not equipped with the LCD image adjustment mechanism. This is because the dichroic prism
is used for image formation. When the LCD panels all get into the best focus, the images are almost
completely converged.

Convergence and Focus Adjustments Mechanism

BOTTOM VIEW
FRONT
Lock screw "a"
Notch and hole "a"
SIDE VIEW (from outside)
RáB-LCD
TOP
R-LCD
B-LCD
Notch and hole "c"
Lock screw "c"
Z
Lock screw "c"
X
Notch and hole "c"
θ
Y
Lock screw "d"
(convergence
Y
adjustment)
X
RáB-LCD panel
mounting screws
θ
Z
SIDE VIEW
G-LCD panel
mounting screws
G-LCD
Notch and hole "b"
Lock screw "b"
SIDE VIEW (from inside)
Eccentric cam
24
θ
X
Y
Z
TOP
G-LCD
G adjusting plate