Sharp XG-V10WU Service Manual page 18

XG-V10WU
AN-SD1U/S422U
3. Removing the reinforcing angles and intake fan duct assembly.
3-1. Remove the four lock screws from the front reinforcing angle and detach this angle.
3-2. Remove the four lock screws from the rear reinforcing angle and detach this angle.
3-3. Remove the five lock screws from the intake fan duct assembly and detach this assembly.
3-4. Remove the two lock screws from the intake cover and detach this cover.
Rear reinforcing angle
Front reinforcing angle
3-2
3-2
Intake cover
18
3-1
3-1
3-2
3-3
3-3
3-4
Intake fan duct assembly
3-3