Oceanlife Zeus 400 User Manual page 34

Any use different from these warnings and instructions will void the
warranty. Before connecting to the electricity grid a product Oceanlife,
make sure the voltage and frequency network corresponds to that
indicated on the data from the plate and that the outlet is fitted with
earth and protected by RCD.
The electrical system which is connected to the device must be
realized in accordance with applicable laws. Never touch it with wet
hands or feet when the plug is inserted. In particular, stop the feeding
before carrying out any operation (maintenance, cleaning, etc. ..). Do
not ever grasp the power plug with wet hands. Do not unplug the
power cord pulling, but pull the plug to prevent damage to the plug
and/or socket. Do not let that the power cord is affected by twisting,
crushing, stretching or come into contact with sharp or heated
surfaces. Do not use Oceanlife products if the power cord or other
parts have been damaged. In such cases ask for assistance at the
store that sold the product. Do not place the unit near heat sources.
The unit must be placed always on stable surfaces. Do not wrap the
cord around the device and in no way when the device is connected
to the electricity grid. Do not let the Oceanlife products will be used by
children or by people not trained to use. If the purchased product will
remain unfulfilled, it is recommended that you disconnect the power
plug from the power supply. In order not to jeopardize the safety of
the device, use only original spare parts and original accessories that
have been approved by the manufacturer. DO NOT use in places
where there is danger of explosion. Do not leave it exposed to the
elements. Do not use electrical extension cords do not comply
with existing legislation and not approved by the authorities, which
could cause damage and fires. Before carrying out any maintenance
operation, always switch off the device and pull the plug from the
power supply.
In case of accidental fall, ask for help to an authorized service center
because it could be some internal malfunction, which limits the safety
of the product.