Download Print this page

Oceanlife Zeus 400 User Manual page 29

Uninterruptible power supply for aquariums

Advertisement

Available languages

Available languages

Simulate a power supply interruption by turning off the switch
that controls the power plug. The UPS must pass with no
interruptions of power supply from the normal operation mode
to the battery mode. Restoring the power, the UPS must pass
with no interruptions of power supply from the battery mode
mode to the normal operation. Warning! During the simulation do
not remove the plug: use the switch. By unplugging it, the UPS
switches from working in a TT system to an IT system for which
it has no adequate protection against damage on earth. At any
time must be assured the connection to the ground connector.
Check that the information on the LCD panel comply with the
relative functioning modes.
Additional security precautions
It is recommended that children do not have access to the UPS, and
especially that the do not have access to a sharp tools to be inserted
in the air vents.
Place the UPS on a flat and stable surface and possibly removed from
direct contact with the floor.
Zeus can only be used in interior locations or in places adequately
protected from extreme temperatures and humidity.
Zeus can only be used in interior locations or in places adequately
protected from extreme temperatures and humidity.
Do not place Zeus UPS within cabinets containing tubs or filtering
units. Always ensure an adequate ventilation and absolutely avoid that
the water can condense on the internal circuitry.

Advertisement

loading

This manual is also suitable for:

Zeus 400 ups