Advertisement
2005 F-Super Duty 250-550 Workshop Manual
23. Position back the block heater and starter wiring.
24. Connect the block heater electrical connector.
25. Connect the starter wiring and install the solenoid cap.
26. Connect the ground strap on the right head and install the bolt.
Vehicles with automatic transmission
27. Install the automatic transmission fluid indicator and tube.
All vehicles
28. Position back the wiring and connect the crankshaft position (CKP) sensor electrical connector.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS5O/~MUS~LEN/20/S5...
Page 5 of 11
1/4/2010
Advertisement
