Advertisement
2005 F-Super Duty 250-550 Workshop Manual
Late build vehicles
18. Connect the exhaust pressure sensor tube fitting to the exhaust manifold and install the exhaust pressure sensor retaining nut.
19. Install the heat shield and bolts.
20. Position the turbocharger adapter pipes. Install the gasket and bolts.
All vehicles
21. NOTE: To aid in installation, make sure the turbocharger Marmon clamp stud is positioned toward the drivers side.
Position the turbocharger adapter pipe.
22. NOTE: Left side shown, right side similar.
NOTE: Use a half-moon wrench to aid in accessing the fasteners.
NOTE: Apply anti-seize lubricant to the threads prior to installing the bolts.
Loosely install the bolts for the turbocharger adapter pipe.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS5O/~MUS~LEN/20/S5...
Page 4 of 11
1/4/2010
Advertisement
