Panasonic CS-RE9JKE Service Manual page 45

Removal Procedure for Main Electronic Controller
1. Separate the drain hose and the drain plate.
Removal Procedure for Cross Flow Fan
1. Release fixing screws on both side, disassembly the fixing board from evaporator on the left side and pull out the
whole evaporator.
2. Loose the fixing screw of the cross flow fan.
3. After removing the bearing, indoor fan can be taken out from the left side
4. Lift up the indoor fan slightly, and then pull the fan motor out.
2. Pull out the discharge grille slightly.
45