Opening & Closing The Bonnet - TATA Motors Indigo Owner's Manual & Service Book

STARTING & DRIVING
OPENING & CLOSING THE BONNET
Opening :
1. Ensure that the car is in neutral gear with the parking brake
applied.
2. Pull the bonnet release lever located under the right hand corner
of the dash board. The bonnet will pop up slightly.
3. Raise the bonnet slightly and with your finger lift the secondary
lock lever located under the bonnet centre.
4. Lift the bonnet up. Pull the bonnet stay rod from its clip and
insert the free end into the slot in the bonnet, slide stay rod
outward to secure.
Closing :
1. To close the bonnet disengage the stay rod & clamp it properly.
2. Lower the bonnet and drop it from a short height to shut.
Ensure that the bonnet is properly locked before driving.
Do not press the bonnet onto the bonnet lock.
Do not leave the engine running in a closed garage.
80
-Opening & Closing the bonnet
CAUTION
CAUTION
Bonnet
release
lever