Bonnet Opening & Closing - TATA Motors Sumo Gold CR-4 Owner's Manual & Service Book

HANDLING BONNET / FUEL FLAP OPENING & CLOSING
Bonnet opening and closing :
To open pull lever (1). This will release the bonnet lock. To open fully, lift
the additional lock lever located on the bonnet centre with the help of
finger. Use the bonnet stay rod to keep the bonnet open.
For closing the bonnet, disengage the stay rod, clamp it properly and
press down the bonnet till it is fully shut.
Ensure that the bonnet is fully locked before driving off.
In case of failure of cable attached to lever (1) bonnet lock can be opened
by inserting a screw driver from the top centre position of grill through a
slot provided behind it on the sheet metal and by pressing the lock plate
towards your left. Push upward the additional lock lever at your right and
Bonnet Opening Lever
lift the bonnet while the lock plate is kept pressed with the help of screw
driver.
Fuel filling Cap :
The fuel filling cap is located at the rear on the left hand side of the vehicle.
The fuel filler lid can be opened by using a cable operated lever located on
the right of the driver's seat. Simply push the lid back to its original position
to lock it.
NOTICE
This feature is available only in few versions.
Fuel Lid Opening Lever
50