Maintenance; Opening & Closing The Bonnet - TATA Motors Xenon Owner's Manual & Service Book

Maintenance

OPENING & CLOSING THE BONNET
Opening & Closing the Bonnet
Opening :
1. Ensure that the vehicle is in
neutral gear with the parking
brake applied.
2. Pull the bonnet release lever
located under the right hand
corner of the dash board. The
bonnet will pop up slightly.
3. Raise the bonnet slightly and
with your finger lift the
secondary lock lever located
under the bonnet centre.
4. Lift the bonnet up. Pull the
bonnet stay rod from its clip
and insert the free end into the
slot in the bonnet, slide stay rod
outward to secure.
90
Ofrecido por www.electromanuales.com
Closing :
1. To close the bonnet disengage
the stay rod & clamp it properly.
2. Lower the bonnet and drop it
from a short height to shut.
CAUTION
Ensure that the bonnet is
properly locked before driving.
Do not press the bonnet onto
the bonnet lock.
Location of Bonnet Release Lever
Bonnet Release Lever
Bonnet Opening Secondary Lock Lever