Assembly Instructions - Kärcher T-Racer T 300 User Manual

ASSEMBLY INSTRUCTIONS

GRAY
Step 2
Insert the 2 matching
pressure nozzles in the slots
4
on the propeller and secure
with cramp.
Step 5
Tighten Lock collar to
assemble by twisting
counter clockwise.
Step 1
Determine the PSI of your pressure washer.
1200–1600 PSI
1700–2300 PSI
YELLOW
Step 3
Insert upper handle into the
lower handle by twisting
together.
Step 6
Insert pressure washer
wand into upper handle.
Push wand down over upper
handle and twist clock-wise
1/4 turn into locked position.
, Select the gray nozzles.
, Select the yellow nozzles.
Step 4
Insert lower handle into
main housing. Push down
and turn clockwise 90° to
lock in lower handle.
Step 7
Turn locking collar clock-
wise over pressure washer
wand until tight.