Operating Controls - Kärcher T-Racer T 300 User Manual

OPERATION CONTROLS
Spray Power
Adjust height of propeller spray head.
Clockwise for wood surfaces counter clockwise for stone, concrete and tile.
Air Flow Control
Adjust the hover effect of the T-Racer by pushing the Air Flow Control
into one of the positions from 0 – 1.
The lowest position is 0 and the highest position is 1.
Please Note:
• For optimum setting test the spray power in an unseen area.
• Never operate in the same area for more than 2 seconds, damage may occur
• Do not use on windows..
5