ASSEMBLY INSTRUCTIONS Tools required: adjustable pliers. Step 1 Step 2 Attach the handle to the frame of the pressure washer. Align holes, insert bolt, trigger gun. and tighten with knob. Step 3 Step 4 Attach the triple jet nozzle to the spray wand.
Step 1 To apply detergents the triple jet nozzle must be set to the “CHEM” position. Step 2 Fill a container with Karcher detergent. Place the filter end of detergent suction tube into the container. Step 3 With the engine running, pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water.
6 feet and always apply detergent from bottom to top). Allow Karcher House Wash to remain on surface 1-3 minutes. Do not allow detergent to dry on surface, if surface appears to be drying, simply wet down surface with fresh water.
Pre-rinse cleaning surface with fresh water. • If painted surfaces are pealing or chipping, If using Kärcher All Purpose Cleaner or use extreme caution as pressure washer Degreaser, place detergent suction tube may remove the loose paint from the directly into cleaning solution and apply surface.
Page 7
Oil Drip. Oil seals are damaged or Call service center. worn. If you encounter any additional difficulties not listed, please call our service center for help. Karcher Customer Support USA Karcher Customer Support USA 1-800- 537-4129 1-800- 537-4129...