VKI Technologies Zuma Brewer Operation And Service Manual page 26

Zuma Brewer - Operation & Service Guide
4. Insert the crank arm shaft through the opening in the front of the brewer, and through the triple cam
and T-bar housing. Please note that the crank arm needs to properly couple with the triple cam.
To do so, you must align the coupling protrusion on the triple cam (
recession on the crank arm (
5. Once you are certain that the crank arm and triple cam are properly aligned, place a center punch in
the center of the crank arm shaft (on the side with the plastic crank arm), and give it one or two taps.
If the two are properly aligned, the crank arm will easily couple with the triple cam.
Page 26

).

) with the coupling



