INPUT
LED Control
Beeper Control
8. Wire Connection to Controller
8-1. 26bit Weigand+RS232(for Card) and 8bit Burst format(for PIN)
-The Reader transmits Card data to Wiegand Data0, Data1 and RS-232 TX line.
-The Reader transmits PIN data to Wiegand Data0 and Data1. (8bit Burst format.)
8-2. ABA Track II+RS232(for Card) and ABA Track II+RS232(for PIN)
- The Reader transmits Card & PIN data on card presentation, Clock, DATA and RS-232 TX line.
NOTE: You have to enter at least 1 numeric number (max. 8 numbers) followed by "ENT" key.
LED
Brown wire
BEEP
Blue wire
7
Proximity Reader with KEYPAD