HIKVISION DS-9600 Series User Manual page 29

VGA AUDIO OUT
3 LINE IN
4 RS-232 Interface
5 VGA
6 HDMI
7 eSATA (Optional)
8 LAN Interface
9 Termination Switch
RS-485 Interface
10
Controller Port
ALARM IN
ALARM OUT
11 GROUND
12 AC 100V ~ 240V
13 POWER
14 USB interface
15 Network Interfaces
with PoE function
Table 1. 10 Description of Rear Panel Interfaces
No. Item
1 VIDEO OUT
AUDIO OUT
2
3 AUDIO IN
4 RS-232 Interface
5 VGA
6 HDMI
7 USB
User Manual of DS-9600/8600/7700/7600 Series NVR
BNC connector for audio output. This connector is
synchronized with VGA video output.
BNC connector for audio input.
Connector for RS-232 devices.
DB9 connector for VGA output. Display local video output
and menu.
HDMI video output connector.
Connects external SATA HDD, CD/DVD-RM.
Connector for LAN (Local Area Network).
RS-485 termination switch.
Up position shows the RS-485 is not terminated.
Down position shows the RS-485 is terminated with 120Ω
resistance.
Connector for RS-485 devices. T+ and T- pins connects to R+
and R- pins of PTZ receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading
devices, the first NVR's D+, D- pin should be connected with
the D+, D- pin of the next NVR.
Connector for alarm input.
Connector for alarm output.
Ground (needs to be connected when NVR starts up).
AC 100V ~ 240V power supply.
Switch for turning on/off the device.
Universal Serial Bus (USB) ports for additional devices such
as USB mouse and USB Hard Disk Drive (HDD).
Network interface for the cameras and to provide power over
Ethernet.
Figure 1. 14 DS-7600NI-ST
Description
BNC connector for video output.
BNC connector for audio output.
BNC connector for audio input. (Also for voice talk)
Connector for RS-232 devices.
DB9 connector for VGA output. Display local video output and
menu.
HDMI video output connector.
Connects USB disks and devices.
28