HIKVISION DS-9600 Series User Manual page 183

4. Select the available physical disk(s) and click
unplug the physical disk when it is under migration" will pop up. Click
5. You can enter the Array Settings interface (Menu>HDD>RAID>Array) and Virtual Disk interface
(Menu>HDD>RAID>Virtual) to check the process of the migration.
6. Reboot the device to take effect of the new settings after the migration process finishes.
7. Enter the HDD Information interface after rebooting. Select an expandable virtual disk and click
to expand the capacity of the virtual disk.
8. In the pop-up message box, click
User Manual of DS-9600/8600/7700/7600 Series NVR
Figure 10. 31 Migrate Array Interface
Figure 10. 32 Array Setting Interface
Figure 10. 33 Virtual Disk Interface
Figure 10. 34 HDD Information Interface
to start expanding.
182
to confirm the settings. The message box of "Do not
to start migration.