Wiring Diagrams - Hitachi CJ 120V Technical Data And Service Manual

(7) Tightening torque of screws and bolts:
•
D4 Tapping Screws [4] [5] [15] ([7]) ([8]) ([14])
•
Machine Screw M4 x 12 [46] ([49])
•
M4 Screw [18] [57] [68] ([20]) ([60]) ([71])
•
Seal Lock Flat Hd. Screw M5 x 10 [50] ([53])
•
Hex. Socket Hd. Bolt M5 x 14 [72] ([75])
•
Hex. Socket Hd. Bolt (W/Flange) M5 x 12 [51] ([54])
•
Lever Bolt [62] ([65])

10-3. Wiring Diagrams

The wiring is in accordance with Fig. 18 (CJ 120V) and Fig. 19 (CJ 120VA).
Switch
Noise suppressor
Noise suppressor
Switch
1.96 0.49 N
2.45 0.49 N
1.96 0.49 N
3.92 --- 5.88 N
3.92 --- 5.88 N
3.92 --- 5.88 N
2.45 0.49 N
Controller ass'y
Fig. 18 CJ 120V
Controller ass'y
Fig. 19 CJ 120VA
m [20 5 kgf cm, 1.4
• •
m [25 5 kgf cm, 1.8
• •
m [20 5 kgf cm, 1.4
• •
m [40 --- 60 kgf cm, 2.9 --- 4.3 ft-lbs.]
• •
m [40 --- 60 kgf cm, 2.9 --- 4.3 ft-lbs.]
• •
m [40 --- 60 kgf cm, 2.9 --- 4.3 ft-lbs.]
• •
m [25 5 kgf cm, 1.8
• •
Stator coil
Choke coil
Armature
Choke coil
Stator coil
Stator coil
Choke coil
Armature
Choke coil
Stator coil
0.4 ft-lbs.]
0.4 ft-lbs.]
0.4 ft-lbs.]
0.4 ft-lbs.]