Antelope Orion³² Owner's Manual page 15

Madi in S-Mux / Madi out S-Mux: Check this box if the Orion³² is connected to a device that is
outputting an S-Mux signal or if you'd like the Orion³² to output an S-Mux MADI signal.
ADC/DAC Trim: The analog Inputs and Outputs of the AD/DA converter can be finely trimmed by
the options available in the drop-down menus. Settings range from 14 – 20 dBu.
To update your firmware:
1. Open the Software Control Panel application and go to the Settings tab (gears icon on the
upper right corner).
2. Click on the Firmware Update button.
3. You will be transferred to the Orion³² update panel, which will now give you the option to
update the Orion³² device firmware.
4. The Orion³² device's front panel display will indicate "LOADER".
1
13