Quick Start - Antelope Orion³² Owner's Manual

4. Quick Start

It only takes a few moments to harness the benefits of the Orion³² sound. Follow these simple steps
to connect Orion³² to your system setup:
1. Connect to the AC power source via rear panel connector (9).
2. Download and install the Orion³² software control panel from: http://www.antelopeaudio.
com/en/support/downloads - This will enable you to control your device from your computer
and select all necessary settings.
3. Connect your choice of inputs and outputs on the rear panel.
4. Connect your USB cable to the Orion³² and your computer. The guest operating system
will recognize the new output audio device (Orion³²). You should redirect sound from the
computer to your newly indicated output – Orion³².
5. If you want to use Orion³² through USB for playback or recording, please follow these
instructions:
Windows:
Got to www.antelopeaudio.com and go to Support / Downloads
Download and install the Orion³² custom ASIO driver.
Click on your PC's START menu, then select:
SETTINGS / CONTROL PANEL / SOUNDS & AUDIO DEVICES / AUDIO and ensure that
the Orion³² is selected as default audio device.
Mac OS:
Got to www.antelopeaudio.com and go to Support / Downloads
Here you will find the latest information on using the Orion³² for USB audio.
In your Apple Menu, go to System Preferences and choose Sound, Select the Output tab
and select Orion³² from the list.
1
8