Rear Panel Explained - Antelope Orion³² Owner's Manual

8. Preset buttons (1-5)
Five Preset buttons store and recall your 'favorite' set-ups. For more information see page 10,
section 8 (Reference to Software Control Panel).
1. Save Preset
1. From Control Panel
1. Ctrl + Click on Preset Button
2. Ctrl + Number 1 to 5 from Keyboard
2. Recall Preset
1. Simply click on your choice of preset

6. Rear Panel Explained

9. Mains Power Connection
The AEC connector supports a range from ~95-245 V. This enables the device to automatically
accommodate mains voltage in every country.
10. Word Clock Input
BNC connector used to accept Word Clock reference.
11. 10M Input
This BNC Input Connector allows the Orion³² to receive timing reference from an Atomic Clock such
as the Antelope 10M, to increase the Oscillator accuracy. If the device is in Oven mode, plugging in
the 10M causes the "Atomic LED" light to illuminate on the device front panel and the atomic device
becomes the primary timing reference, thus providing better sample accuracy, more detailed sound
and greater stability.
12. Word Clock Outputs
Four Word Clock Outputs with BNC connectors.
13. S/PDIF Input/Output
75 Ω S/PDIF inputs for use with compatible equipment.
1
10