Sending Or Receiving A Text Message - Inmarsat EXPLORER 700 Getting Started

• 1*, 2*, 3*, 4*. If, for example, you select 1* from the MSN speech number drop-down list, an
incoming speech call is accepted by all devices on this port that are programmed with MSN
number 1*.
• 0401 to 0408. These are local call numbers for separate devices connected to port 1.
• 0411 to 0418. These are local call numbers for separate devices connected to port 2.
An incoming call is accepted by all devices that are programmed with the selected MSN and
connected to the correct port.
h. Click OK to save the changes, or Cancel to exit without saving.
Connecting to the ISDN interface – data
To connect to the ISDN interface, use an ISDN cable with an ISDN connector.
To connect to the ISDN interface:
a. Connect your computer to your ISDN modem.
b. Connect the ISDN cable between your ISDN modem and one of the ISDN connectors on the
EXPLORER 700.
After power up and pointing, activate the dial-up connection on your computer and check your
connection by browsing to the Internet.
Connecting to the ISDN interface – voice/fax
To connect an ISDN phone or G4 fax machine to one of the ISDN connectors, you need an ISDN
cable with an ISDN connector.
To connect to the ISDN interface:
a. Connect the ISDN cable to your phone or fax machine.
b. Connect the other end of the cable to one of the ISDN connectors on the EXPLORER 700.
After power up and pointing, check the connection by making a phone call or sending a fax. R
4.9

Sending or receiving a text message

You can send text messages from a BGAN terminal to another BGAN terminal and from a BGAN
terminal to a mobile phone. You can also send a text messages from a mobile phone to a BGAN
terminal, but only on those networks with which Inmarsat has an agreement.
To access text features, select the Text tab in BGAN LaunchPad:
Getting Started with the EXPLORER 700 Page 29