Inmarsat EXPLORER 700 Getting Started page 29

c. Click on List Bluetooth Devices to list all Bluetooth devices within range. A screen similar to
the following is displayed, giving the device address and current status, including pairing
information.
If required, either:
Pair a device by right-clicking on an unpaired device and selecting Pair. Enter the passkey
•
when prompted.
Or:
Unpair a device by right-clicking on a paired device and selecting Un-pair.
•
d. Click on OK to save the configured settings, or click on Cancel to exit without saving. When you
have paired the device and the terminal, the Bluetooth software automatically installs two
Bluetooth modems on your computer, one for BGAN LaunchPad and one for dial-up
networking.
BGAN LaunchPad automatically detects the Bluetooth connection and you can use your device to
access Bluetooth services.
You cannot make a local call between two Bluetooth handsets using the EXPLORER 700. You can
make a local call from a Bluetooth handset or headset to an analogue phone, or from an analogue
phone to a Bluetooth handset or headset.
You can look up the local Bluetooth phone numbers using the terminal's display and keypad. To do
this, select PROPERTIES > BLUETOOTH DEVICES > DISPLAY from the terminal's display.
The list shows all accepted Bluetooth devices with local number and Bluetooth name.
Tip If you want to open an IP data connection over Bluetooth using BGAN LaunchPad, you
must un-pair from all other devices, so that your computer is paired only with the BGAN
terminal. You can now open BGAN LaunchPad and access terminal services across the
Bluetooth connection.
Tip The Bluetooth and WLAN interfaces may interfere with each other if they are both active.
For optimum performance, do not use Bluetooth and WLAN simultaneously, or use WLAN
mode 802.11a.
If you can't make a Bluetooth data connection ...
If you can't make a standard data connection over Bluetooth, check the Dial-up networking
properties on your operating system to ensure that the Bluetooth standard modem is selected.
Refer to the documentation for your operating system for details.
Getting Started with the EXPLORER 700 Page 27