Inmarsat EXPLORER 700 Getting Started page 18

To check that the standard connection is open, select the Data tab in BGAN LaunchPad.
The following screen is displayed:
If the standard connection is open, the words Disconnect Standard are displayed below the
connection icon.
Note If the standard connection is closed, the words Connect Standard are displayed below the
connection icon. Click on the icon to open the standard connection.
You can now browse the Internet, send and receive email and use other IP applications. All traffic is
transferred across the standard connection.
4.4
Opening a streaming data connection
If you require a guaranteed data rate for your connection (if, for example, the application is time
critical), you can connect using one of the three dedicated streaming connections, at the following
data rates:
• 32kbps streaming
• 64kbps streaming
• 128kbps streaming
• 256kbps streaming
Each dedicated streaming class connection is charged by the length of time that the connection is
live. When you open a streaming connection, the standard connection is closed.
Tip By default, error correction (also called network packet retransmission) is switched on.
Inmarsat recommends that you turn error correction off for UDP/IP connections, as this
feature is not required for this connection type. Refer to "BGAN and IP data connections" for
details.
Getting Started with the EXPLORER 700 Page 16