Inmarsat EXPLORER 700 Getting Started page 28

• From a Bluetooth-enabled computer using the terminal's Web interface. You must be
connected to the terminal via the LAN interface or USB interface. Type in 192.168.0.1 into a
Web browser to display the Web interface. For information on using the Web interface, refer
to the "EXPLORER 700 User Manual".
b. Enable your Bluetooth device, and search for devices in range. The terminal's default Device
Name is EXPLORER 700.
c. Enter the terminal's passkey when prompted to pair with the terminal. By default, the passkey is
the terminal's serial number, which you can find on the label on the back of the terminal (with
the prefix S/N). When you have paired the device and the terminal, the Bluetooth software
automatically installs two Bluetooth modems on your computer, one for BGAN LaunchPad and
one for dial-up networking.
d. Open BGAN LaunchPad. BGAN LaunchPad automatically detects the Bluetooth connection and
you can use your device to access Bluetooth services.
Tip If you want to open an IP data connection over Bluetooth using BGAN LaunchPad, you
must un-pair from all other devices, so that your computer is paired only with the BGAN
terminal. You can now open BGAN LaunchPad and access terminal services over BGAN
LaunchPad.
Connecting from the terminal to your device
The Bluetooth device must be placed within a maximum distance of 100m from the BGAN terminal.
Note that this is the absolute maximum distance; the actual maximum distance may be shorter,
depending on the conditions.
To search for and pair with your Bluetooth-enabled device from the terminal using BGAN
LaunchPad:
a. From BGAN LaunchPad main menu, select Terminal > Bluetooth Interface Settings. The
Configure Bluetooth Interface dialog box is displayed, as shown below:
b. If the Bluetooth interface is not enabled, select the Enable radio button.
Note The Bluetooth device that you want to pair with must also be enabled.
Getting Started with the EXPLORER 700 Page 26