Dimm Module Population Confi Guration - Supero SUPERSERVER 7046GT-TRF User Manual

DIMM Module Population Confi guration
For memory to work properly, follow the tables below for memory installation:
Memory Support for Serverboards with 5500 Processors
RDIMM Population for Serverboards with 5500 Processors Installed
DIMM DIMMs
Slots per Populated
Channel per
Channel
2 1
2 1
2 2
2 2
Note 1: 1333 RDIMMs will run at 1066 Mhz (-BIOS automatic downgrading)
Note 2: 1333/1066 RDIMMs will run at 800 Mhz (-BIOS automatic downgrading)
UDIMM Population for Serverboards with 5500 Processors Installed
DIMM DIMMs
Slots Populated
per per
Channel Channel
2 1
2 2
Note 1: 1333 RDIMMs will run at 800 Mhz (-BIOS automatic downgrading)
Chapter 5: Advanced Serverboard Setup
DIMM Type (Reg.=
Registered)
Reg. DDR3 ECC
Reg. DDR3 ECC
Reg. DDR3 ECC
Reg. DDR3 ECC
DIMM Type (Reg.=
Registered)
Unbuffered DDR3 ECC/
Non-ECC
Unbuffered DDR3 ECC/
Non-ECC
5-11
Speeds (in MHz) Ranks per
DIMM (any
combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
800,1066,1333 SR or DR
800,1066 (Note 1) QR
800,1066 (Note 1) Mixing SR, DR
800 (Note 2) Mixing SR, DR,QR
Speeds (in MHz) Ranks per
DIMM (any
combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
800,1066,1333 SR or DR
800,1066 (Note) Mixing SR, DR