Table of Contents
Advertisement
Processors and their Corresponding Memory Modules
CPU#
P1-A1
CPU1
P2-E1
CPU2
Processor and Memory Module Population
Number of
CPUs+DIMMs
CPU1
1 CPU &
P1-A1/P1-B1
2 DIMMs
CPU1
1 CPU &
P1-A1/P1-B1, P1-C1/P1-D1
4 DIMMs
CPU1
1 CPU &
P1-A1/P1-B1, P1-C1/P1-D1 + Any memory pairs in P1-A2/-B2/-C2/-D2 DIMM slots
5~8 DIMMs
CPU1 + CPU2
2 CPUs &
P1-A1/P1-B1, P2-E1/P2-F1
4 DIMMs
CPU1 + CPU2
2 CPUs &
P1-A1/P1-B1/P1-C1/P1-D1, P2-E1/P2-F1
6 DIMMs
CPU1 + CPU2
2 CPUs &
P1-A1/P1-B1/P1-C1/P1-D1, P2-E1/P2-F1/P2-G1/P2-H1
8 DIMMs
CPU1/CPU2
2 CPUs &
P1-A1/P1-B1/P1-C1/P1-D1, P2-E1/P2-F1/P2-G1/P2-H1 + Any memory pairs in P1, P2
10~16 DIMMs
DIMM slots
CPU1/CPU2
2 CPUs &
P1-A1/P1-B1/P1-C1/P1-D1, P2-E1/P2-F1/P2-G1/P2-H1,P1-A2/P1-B2/P1-C2/P1-D2,
16 DIMMs
P2-E2/P2-F2/P2-G2/P2-H2
DIMM Module Population Confi guration
For memory to work properly, follow the tables below for memory installation:
RDIMM Support POR on the E5-2600 Series Processor Platform
DIMM
DIMMs
Slots per
Populated
Channel
per DDR
Channel
1
1
2
1
2
2
Population Rules:
1. Any combination of x4 and x8 RDIMMs with 1 Gb or 2 Gb DRAM Density are supported.
2. Populate DIMMs starting with DIMM A1.
3. When mixing QR with SR or DR on the same DDR channel, put the QR in DIMMA1 fi rst.
Note: For the memory modules to work properly, please install DIMM modules in
pairs (with an even number of DIMMs installed).
Note: All channels in a system will run at the fastest common frequency.
Corresponding DIMM Modules
P1-B1
P1-C1
P1-D1
P2-F1
P2-G1
P2-H1
CPU and Memory Population Confi guration Table
(*For memory to work proper, please install DIMMs in pairs)
RDIMM Type
(RDIMM: Reg.=
Registered)
Reg. ECC DDR3
Reg. ECC DDR3
Reg. ECC DDR3
5-11
Chapter 5: Advanced Serverboard Setup
P1-A2
P1-B2
P2-E2
P2-F2
POR Speeds (in MHz)
800/1066/1333/1600/1866
800/1066/1333/1600
800/1066/1333/1600
P1-C2
P1-D2
P2-G2
P2-H2
Ranks per DIMM
(Any
Combination)
SR, DR, or QR
SR, DR, or QR
Mixing SR, DR, QR
Advertisement
Table of Contents
