Resetting From The Setup Wizard - Kanguru Defender V2 User Manual

Rev.2 hardware encrypted, tamper proof usb flash drive

Hide thumbs Also See for Defender V2:

Table of Contents

2.2.7 Resetting from the Setup Wizard

If you experience any problems while running the Setup Wizard, you may have to perform a device reset

before you can complete the setup process.

Caution! Performing the reset function will format the device's secure encrypted partition. All data

stored on the secure partition will be lost.

To perform a device reset during the Setup Wizard:

1. From anywhere in the Setup Wizard, click on the Prev button until you return to the Start screen.

2. On the Start screen you will see a Reset button located at the bottom of the window. Click on the

Reset button.

3. A dialog box appears asking you to confirm the reset. Click on Yes to reset your device to the

factory default settings.

After the device has been reset to the factory default setting you will need to complete the Setup Wizard

again before you are able to access the Defender V2's secure partition.

Resetting from the Setup Wizard

Table of Contents

Kdv2