Panasonic CF-T8 Series Supplementary Instructions Manual page 6

Installation
Step 3 User Fingerprint Enrollment
Performed by each user.
1
<Model with Windows 7>
Click
Center].
<Model with Windows XP>
Click [start] - [All Programs] - [Protector Suite] - [Control
Center].
2
Carefully read the License Agreement, and then click [Accept].
3
<Model with Windows XP>
Click [Next].
4
Select an enrollment mode, and click [Apply].
• Follow the on-screen instructions.
Enrollment mode
Fingerprint data is saved in either of two methods. A device to save fi ngerprint
data cannot be changed unless Fingerprint Utility is reinstalled.
• Enrollment to the biometric device
All enrolled fi ngerprints are stored directly to the sensor. The user data will
be secured by the hardware protection keys obtained by the fi ngerprint
sensor. There is a limit to the number of fi ngerprints that can be enrolled.
NOTE
The numbers of fi ngers to register for the fi ngerprint sensor may vary
depending on the characteristics of fi ngers.
• Enrollment to the hard disk
All enrolled fi ngerprints are stored on the hard disk. There are no limits for
the numbers of fi ngers to register, although there is a limit for the numbers
of those for Power-on security.
5
Enroll your fi ngerprint following the on-screen instructions.
6
(Start) - [All Programs] - [Protector Suite] - [Control