Panasonic CF-T8 Series Supplementary Instructions Manual page 11

Deleting (Initializing) Owner's Data
When you dispose of the computer or transfer the ownership, delete (initialize) the
owner's data to avoid unauthorized access. To initialize the owner's data, perform
steps 1 to 3.
In other cases, refer to the required steps.
NOTE
The data enrolled in the fingerprint sensor is not image data. You cannot
restore fi ngerprint image data from the data enrolled in the fi ngerprint sensor.
1
Disable Power-on Security
Performed by the Computer Administrator.
A Start "Control Center". (
B Click [Identify] - [Status] - [Power-on security status].
C Click [Edit], and remove the check mark from [Enable power-on security],
and click [Apply].
D Click [Identify] - [Power-on Password].
E Click [Manage Passwords...].
F Select [Power-On] in [Password Types], and click [Unset password...].
G Enter the Power-On password, and click [OK].
H Click [Close].
• Confi rm that fi ngerprint data is not registered.
2
Delete Fingerprint Data
Performed by each user.
A Start "Control Center". (
B Click [Identify] - [Account Operation].
C Click [Delete user data].
• At the confi rmation message, click [Yes].
D Enter Windows log on password then, click [Send].
• Confi rm that there is no item in [Password Types].
page 8)
page 8)
11